RN60D8063FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D8063FRE6 is a 806 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 1088 units in stock. Substitute parts may be required due to packaging availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D8063FRE6

Vishay DaleIn Stock: 1116RN60D8063FRE6 Datasheet

Current PartRFQ

RN60D8063FB14

Vishay DaleIn Stock: 747RN60D8063FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D8063FB14 qualifies as a direct substitute for the RN60D8063FRE6 based on the following criteria:

Matching Electrical Parameters:

• Identical resistance value: 806 kOhms
• Identical tolerance: ±1%
• Identical power rating: 0.25W (1/4W)
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 175°C

Matching Mechanical Parameters:

• Identical composition: Metal Film
• Identical package type: Axial
• Identical physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Identical series: Military, MIL-R-10509/1, RN60
• Identical features: Flame Retardant Coating, Military, Moisture Resistant, Safety

Difference: The sole distinction between these parts is packaging format: RN60D8063FRE6 is supplied in Tape & Reel (TR) configuration, while RN60D8063FB14 is supplied in Bulk packaging. Both parts maintain identical electrical performance and physical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D8063FRE6 and RN60D8063FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

RN60D8063FRE6 (Tape & Reel): Suitable for automated assembly processes requiring tape-and-reel packaging format. Recommended for high-volume production environments with pick-and-place equipment.

RN60D8063FB14 (Bulk): Suitable for manual assembly, low-volume production, or applications where tape-and-reel format is not required. Appropriate for prototype development and repair applications.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. Military-grade construction and MIL-R-10509/1 certification are preserved across both variants.

Frequently Asked Questions (FAQ)

Q: Can RN60D8063FB14 be used as a direct replacement for RN60D8063FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Electrical performance, tolerance, power rating, temperature characteristics, and physical dimensions are identical.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, designed for automated assembly equipment. Bulk packaging supplies loose components in standard quantities. Both formats contain identical components with no electrical or mechanical differences.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected. Military-grade specifications and MIL-R-10509/1 certification apply equally to both variants.

Q: Which part should I select for my application?

A: Selection depends on your assembly process. Use RN60D8063FRE6 (Tape & Reel) for automated production lines. Use RN60D8063FB14 (Bulk) for manual assembly, prototyping, or repair work. Electrical performance is identical in both cases.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.145" diameter × 0.344" length (3.68mm × 8.74mm). They are mechanically interchangeable in all respects except for packaging format.