RN60D75R0FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D75R0FRE6 is a 75 Ohm, 1/4W metal film axial resistor manufactured by Vishay Dale, designed for military and aerospace applications. This component features flame retardant coating, moisture resistance, and compliance with MIL-R-10509/1 specifications. The part is currently in active production status with 1580 units available in Cut Tape packaging. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D75R0FRE6

Vishay DaleIn Stock: 1627RN60D75R0FRE6 Datasheet

Current PartRFQ

RN60D75R0FB14

Vishay DaleIn Stock: 2078RN60D75R0FB14 Datasheet

DirectRFQ

RN60D75R0FRE6

Vishay DaleIn Stock: 1627RN60D75R0FRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RN60D75R0FRE6 is determined by equivalence across the following critical parameters:

• Resistance value: 75 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Series compliance: Military, MIL-R-10509/1, RN60
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The identified substitute part differs only in packaging format (Bulk versus Cut Tape), which does not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D75R0FRE6 and RN60D75R0FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements:

• RN60D75R0FRE6 (Cut Tape): Suitable for automated pick-and-place assembly processes and applications requiring pre-formatted tape packaging.
• RN60D75R0FB14 (Bulk): Suitable for manual assembly, reel-based automated processes, or applications where bulk quantities are preferred.

Both parts maintain MIL-R-10509/1 military specification compliance and are subject to identical regulatory classifications (RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8533.21.0090).

Frequently Asked Questions (FAQ)

Q: Can RN60D75R0FB14 replace RN60D75R0FRE6 in circuit applications?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Cut Tape). Circuit performance, reliability, and compliance characteristics are equivalent.

Q: Does packaging format affect component performance?

A: No. Packaging format affects only handling, storage, and assembly processes. Electrical specifications, temperature performance, and mechanical dimensions remain identical regardless of packaging.

Q: Are both parts suitable for military applications?

A: Yes. Both RN60D75R0FRE6 and RN60D75R0FB14 comply with MIL-R-10509/1 specifications and include military-grade features (flame retardant coating, moisture resistance, safety classification).

Q: What is the difference between Cut Tape and Bulk packaging?

A: Cut Tape (CT) packaging provides components pre-formatted on adhesive tape for automated assembly equipment. Bulk packaging provides loose components suitable for manual assembly or reel-based automated processes.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090).