RN60D7500FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D7500FRE6 is a 750 Ohm, 1/4W metal film axial resistor manufactured by Vishay Dale, designed for military and high-reliability applications. This component features flame retardant coating, moisture resistance, and compliance with MIL-R-10509/1 specifications. The part is currently active in production with 1792 units in stock. Substitute parts are identified when packaging or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D7500FRE6

Vishay DaleIn Stock: 1836RN60D7500FRE6 Datasheet

Current PartRFQ

RN60D7500FB14

Vishay DaleIn Stock: 868RN60D7500FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D7500FRE6 and RN60D7500FB14 are direct substitutes based on identical electrical and mechanical parameters. Both components share the same base product number (RN60), resistance value (750 Ohms), tolerance (±1%), power rating (0.25W), composition (metal film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), package type (axial), and physical dimensions (0.145" Dia × 0.344" L).

The only distinction between these parts is packaging format: RN60D7500FRE6 is supplied in Cut Tape (CT) packaging, while RN60D7500FB14 is supplied in Bulk packaging. Both maintain identical performance characteristics and military-grade specifications under MIL-R-10509/1.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D7500FRE6 and RN60D7500FB14 are active production components from Vishay Dale with identical electrical performance and military-grade specifications. Selection between these parts should be based on packaging requirements and inventory availability.

RN60D7500FRE6 in Cut Tape packaging is suitable for automated assembly processes and tape-and-reel handling systems. RN60D7500FB14 in Bulk packaging is appropriate for manual assembly operations or applications where tape packaging is not required.

Both parts maintain RoHS non-compliant status and REACH Affected classification. Both are subject to EAR99 export control classification. Component selection should account for supply chain requirements, assembly methodology, and project-specific packaging specifications.

Frequently Asked Questions (FAQ)

Q: Can RN60D7500FB14 be used as a direct replacement for RN60D7500FRE6?

A: Yes. Both parts are electrically and mechanically identical with the same resistance (750 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating range (-65°C to 175°C). The only difference is packaging format (Cut Tape versus Bulk).

Q: What is the difference between Cut Tape and Bulk packaging?

A: Cut Tape (CT) packaging supplies components on adhesive tape in a carrier, optimized for automated pick-and-place assembly equipment. Bulk packaging supplies loose components, suitable for manual assembly or alternative handling methods. Electrical performance is identical.

Q: Are these parts suitable for military applications?

A: Yes. Both RN60D7500FRE6 and RN60D7500FB14 comply with MIL-R-10509/1 military specifications and feature flame retardant coating, moisture resistance, and safety-rated construction.

Q: What are the compliance and regulatory considerations?

A: Both parts are RoHS non-compliant and REACH Affected. Both are classified under EAR99 export control. Verify compliance requirements for your specific application and jurisdiction before component selection.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes, provided the assembly process accommodates the packaging format. Cut Tape packaging is compatible with automated assembly lines, while Bulk packaging requires manual placement or alternative handling systems. Electrical performance and physical dimensions are identical.