RN60D6981FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D6981FRE6 is a 6.98 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale and conforms to military specification MIL-R-10509/1. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The RN60D6981FRE6 is currently active in production with 974 units in stock. Substitute parts are identified to address packaging availability, inventory requirements, or supply chain alternatives while maintaining identical electrical and mechanical performance.

Substiute Parts

RN60D6981FRE6

Vishay DaleIn Stock: 1022RN60D6981FRE6 Datasheet

Current PartRFQ

RN60D6981FB14

Vishay DaleIn Stock: 1056RN60D6981FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN60D6981FRE6 is determined by strict equivalence across the following electrical and mechanical parameters:

• Resistance value: 6.98 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Series compliance: MIL-R-10509/1, RN60
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The identified substitute part maintains all electrical specifications and physical dimensions. The primary difference is packaging format (Tape & Reel versus Bulk), which does not affect component performance or circuit functionality.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D6981FRE6 and RN60D6981FB14 are active production components manufactured by Vishay Dale with identical electrical performance and physical specifications. Selection between these parts is determined by packaging and supply requirements:

The RN60D6981FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments. The RN60D6981FB14 in Bulk packaging is appropriate for manual assembly, prototyping, or applications where component quantities do not justify reel-based procurement.

Both parts maintain compliance with military specification MIL-R-10509/1 and share identical RoHS and REACH status. Component selection should be based on assembly methodology and inventory management requirements rather than electrical or thermal performance considerations.

Frequently Asked Questions (FAQ)

Q: Can RN60D6981FB14 be used as a direct replacement for RN60D6981FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid for any application where the RN60D6981FRE6 is specified.

Q: What is the significance of the packaging difference between these parts?

A: Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment. Bulk packaging is supplied loose or in standard containers for manual handling. The component itself is identical; packaging affects only the procurement and assembly process.

Q: Are there any compliance or certification differences between these substitute parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and military series designation (MIL-R-10509/1, RN60). Compliance profile is equivalent.

Q: What parameters must remain constant for substitution validity?

A: Resistance value (6.98 kOhms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), and physical dimensions (0.145" Dia x 0.344" L) must all remain unchanged for substitution to be valid.

Q: Can these parts be used interchangeably in military applications?

A: Yes. Both parts conform to MIL-R-10509/1 specification and carry identical military series designation (RN60). They are interchangeable for military and high-reliability applications.