RN60D6980FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D6980FRE6 is a 698 Ohm, 1/4W metal film axial resistor manufactured by Vishay Dale, designed for military and aerospace applications. This component features flame retardant coating, moisture resistance, and safety-grade construction in compliance with MIL-R-10509/1 specifications. The part is currently active in production with 1091 units in stock. Substitute parts are identified to provide procurement flexibility while maintaining electrical and mechanical compatibility for applications requiring equivalent performance characteristics.

Substiute Parts

RN60D6980FRE6

Vishay DaleIn Stock: 1165RN60D6980FRE6 Datasheet

Current PartRFQ

RN60D6980FB14

Vishay DaleIn Stock: 961RN60D6980FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D6980FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 698 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Package configuration: Axial Through Hole (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Series compliance: MIL-R-10509/1, RN60 (exact match required)

The primary difference between the main part and its substitute is packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is supplied in Bulk format. Both parts are manufactured by Vishay Dale and meet identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D6980FRE6 and RN60D6980FB14 are active production components manufactured by Vishay Dale with identical electrical performance and mechanical compatibility. Selection between these parts should be based on procurement requirements:

The RN60D6980FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments where component feeding and placement automation is utilized.

The RN60D6980FB14 in Bulk format is suitable for manual assembly, repair operations, or applications where tape-and-reel packaging is not required.

Both parts maintain equivalent compliance status: RoHS non-compliant, REACH Affected, and ECCN EAR99 classification. No functional or performance differences exist between these parts; substitution is purely a matter of packaging format and procurement logistics.

Frequently Asked Questions (FAQ)

Q: Can RN60D6980FB14 be used as a direct replacement for RN60D6980FRE6 in circuit applications?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Bulk). Circuit performance, reliability, and specifications are equivalent.

Q: What is the significance of the packaging difference between these parts?

A: Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment. Bulk packaging is used for manual assembly, repair kits, or applications where automated feeding is not required. The component itself is identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090). Compliance profiles are equivalent.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid only when the following parameters match exactly: resistance value (698 Ohms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), package type (Axial), physical dimensions (0.145" Dia × 0.344" L), and series compliance (MIL-R-10509/1, RN60).

Q: Can these parts be used interchangeably in military or aerospace applications?

A: Yes. Both parts comply with MIL-R-10509/1 specifications and are rated for military-grade applications. The packaging format does not affect military qualification or performance characteristics.

Q: How should packaging format be considered in procurement decisions?

A: Packaging format affects assembly methodology and logistics only. For automated production lines, Tape & Reel format is standard. For manual assembly, repair, or low-volume applications, Bulk format may be more practical. Electrical performance is identical regardless of packaging choice.