RN60D6651FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D6651FRE6 is a 6.65 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale and complies with military specification MIL-R-10509/1. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The RN60D6651FRE6 is currently active in production with 1051 pieces available in stock. Substitute parts are identified based on identical electrical specifications and compatible mechanical packaging to support procurement flexibility and supply chain continuity.

Substiute Parts

RN60D6651FRE6

Vishay DaleIn Stock: 1105RN60D6651FRE6 Datasheet

Current PartRFQ

RN60D6651FB14

Vishay DaleIn Stock: 1276RN60D6651FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D6651FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 6.65 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Series compliance: MIL-R-10509/1, RN60 base product

The RN60D6651FB14 meets all electrical and mechanical substitution criteria. The primary difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts share identical component specifications, material composition, and performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D6651FRE6 and RN60D6651FB14 are active production parts manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements:

• RN60D6651FRE6 is specified for automated assembly processes requiring Tape & Reel packaging format
• RN60D6651FB14 is specified for manual assembly or bulk procurement applications

Both parts comply with MIL-R-10509/1 military specification and maintain equivalent performance across all operating conditions. RoHS non-compliance status is identical for both parts. REACH and ECCN classifications are equivalent. Component selection should be based on assembly methodology and supply chain logistics rather than electrical performance, as both parts deliver identical functional characteristics.

Frequently Asked Questions (FAQ)

Q: Can RN60D6651FB14 replace RN60D6651FRE6 in circuit applications?

A: Yes. Both parts are electrically and mechanically equivalent. The RN60D6651FB14 delivers identical resistance value, tolerance, power rating, temperature coefficient, and operating temperature range. Substitution is valid for all circuit applications where the main part is specified.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape suitable for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in containers suitable for manual assembly or hand-placement operations. Electrical and mechanical performance is identical between packaging formats.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090). Military specification compliance (MIL-R-10509/1) is equivalent.

Q: Can these parts be used interchangeably in military applications?

A: Yes. Both parts comply with MIL-R-10509/1 specification and feature identical military-grade construction including flame retardant coating, moisture resistance, and safety rating. Interchangeability is supported for all military and high-reliability applications.

Q: What determines substitution eligibility for RN60 series resistors?

A: Substitution is based on matching resistance value, tolerance, power rating, composition type, package configuration, temperature coefficient, operating temperature range, and physical dimensions. All these parameters must be identical between the main part and substitute part.