RN60D61R9FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D61R9FRE6 is a 61.9 Ohm ±1% metal film through-hole resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, compliant with MIL-R-10509/1 specifications. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and aerospace applications. With 919 units currently in stock, alternative packaging configurations are available to support procurement flexibility and supply chain continuity.

Substiute Parts

RN60D61R9FRE6

Vishay DaleIn Stock: 1029RN60D61R9FRE6 Datasheet

Current PartRFQ

RN60D61R9FB14

Vishay DaleIn Stock: 1206RN60D61R9FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D61R9FB14 qualifies as a direct substitute based on identical electrical and mechanical parameters. Substitution is valid when the following criteria are met:

• Resistance value: 61.9 Ohms (exact match)
• Tolerance: ±1% (exact match)
• Power rating: 0.25W (exact match)
• Composition: Metal Film (exact match)
• Temperature coefficient: ±100ppm/°C (exact match)
• Operating temperature range: -65°C to 175°C (exact match)
• Package type: Axial (exact match)
• Physical dimensions: 0.145" Dia x 0.344" L (exact match)
• Series compliance: MIL-R-10509/1, RN60 (exact match)
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety (exact match)

The only difference between the main part and substitute is the packaging configuration: RN60D61R9FRE6 is supplied in Tape & Reel (TR) format, while RN60D61R9FB14 is supplied in Bulk format.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D61R9FRE6 and RN60D61R9FB14 are active products from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements:

• RN60D61R9FRE6 (Tape & Reel): Suitable for automated assembly processes and high-volume production environments requiring component feeding systems.
• RN60D61R9FB14 (Bulk): Suitable for manual assembly, prototyping, repair, and low-to-medium volume applications.

Both parts maintain RoHS non-compliant status and REACH Affected classification. Component selection should align with procurement logistics, assembly methodology, and inventory management practices.

Frequently Asked Questions (FAQ)

Q: Can RN60D61R9FB14 replace RN60D61R9FRE6 in production?

A: Yes. Both parts are electrically and mechanically identical. The substitution is valid provided the assembly process can accommodate bulk packaging instead of tape and reel format.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape suitable for automated pick-and-place equipment. Bulk packaging supplies loose components in trays or bags, typically used for manual assembly or lower-volume applications.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.145" Dia x 0.344" L (3.68mm x 8.74mm) and are housed in axial package format.

Q: Do both parts meet military specifications?

A: Yes. Both RN60D61R9FRE6 and RN60D61R9FB14 comply with MIL-R-10509/1 and are part of the military-grade RN60 series.

Q: What is the temperature operating range?

A: Both parts operate from -65°C to 175°C with a temperature coefficient of ±100ppm/°C.