RN60D6040FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D6040FRE6 is a 604 Ohm ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale, this component is part of the military-grade RN60 series compliant with MIL-R-10509/1 specifications. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and procurement optimization while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60D6040FRE6

Vishay DaleIn Stock: 773RN60D6040FRE6 Datasheet

Current PartRFQ

RN60D6040FB14

Vishay DaleIn Stock: 897RN60D6040FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60D6040FRE6 are qualified based on strict electrical and mechanical parameter matching:

Qualifying Criteria:

• Resistance value: 604 Ohms (exact match)
• Tolerance: ±1% (exact match)
• Power rating: 0.25W / 1/4W (exact match)
• Composition: Metal Film (exact match)
• Temperature coefficient: ±100ppm/°C (exact match)
• Operating temperature range: -65°C to 175°C (exact match)
• Package configuration: Axial (exact match)
• Physical dimensions: 0.145" Dia × 0.344" L / 3.68mm × 8.74mm (exact match)
• Series: RN60 military series, MIL-R-10509/1 compliant (exact match)
• Features: Flame retardant coating, military grade, moisture resistant, safety rated (exact match)

The primary distinction between the main part and its substitute is packaging format: the RN60D6040FRE6 is supplied in Tape & Reel (TR) configuration, while the substitute RN60D6040FB14 is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale and maintain identical electrical specifications and physical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D6040FRE6 and RN60D6040FB14 are active products manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

RN60D6040FRE6 (Tape & Reel): Suitable for automated assembly processes and high-volume production environments where tape-and-reel packaging provides handling efficiency and component feeding compatibility with pick-and-place equipment.

RN60D6040FB14 (Bulk): Suitable for manual assembly, low-volume production, prototyping, and applications where bulk packaging is preferred for inventory management or component handling procedures.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. Military-grade construction, MIL-R-10509/1 compliance, and all specified features remain consistent across both packaging options.

Frequently Asked Questions (FAQ)

Q: Can RN60D6040FB14 (Bulk) be used as a direct replacement for RN60D6040FRE6 (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. Substitution is valid for applications where the bulk packaging format is compatible with assembly procedures and inventory management systems.

Q: Are there any electrical performance differences between the two parts?

A: No. Both parts share identical resistance (604 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do both parts meet the same military specifications?

A: Yes. Both RN60D6040FRE6 and RN60D6040FB14 are part of the RN60 military series and comply with MIL-R-10509/1 specifications. Both feature flame retardant coating, moisture resistance, and safety-rated construction.

Q: What is the physical compatibility between these parts?

A: Both parts are identical in physical dimensions (0.145" Dia × 0.344" L / 3.68mm × 8.74mm) and use the same axial package configuration. They are mechanically interchangeable on PCBs designed for axial through-hole resistors.

Q: Are there compliance or certification differences?

A: No. Both parts share identical RoHS status (non-compliant) and REACH status (Affected). Compliance profiles are equivalent.

Q: Which packaging format should be selected for new designs?

A: Selection depends on manufacturing process requirements. Tape & Reel (TR) is standard for automated assembly lines. Bulk packaging is appropriate for manual assembly, prototyping, or environments where component feeding systems are not required.