RN60D5622FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D5622FRE6 is a 56.2 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1) and features flame retardant coating with moisture-resistant properties suitable for military and high-reliability applications. The part maintains active product status with 875 units currently in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format (Tape & Reel) is unavailable or when bulk quantities are required.

Substiute Parts

RN60D5622FRE6

Vishay DaleIn Stock: 915RN60D5622FRE6 Datasheet

Current PartRFQ

RN60D5622FB14

Vishay DaleIn Stock: 976RN60D5622FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D5622FB14 qualifies as a direct substitute based on identical electrical and mechanical parameters. Substitution is valid when the following criteria are met:

• Resistance value: 56.2 kOhms (exact match)
• Tolerance: ±1% (exact match)
• Power rating: 0.25W, 1/4W (exact match)
• Composition: Metal Film (exact match)
• Package configuration: Axial (exact match)
• Temperature coefficient: ±100ppm/°C (exact match)
• Operating temperature range: -65°C to 175°C (exact match)
• Series classification: Military, MIL-R-10509/1, RN60 (exact match)
• Physical dimensions: 0.145" Dia x 0.344" L (exact match)

The only difference between the main part and substitute is the packaging format: RN60D5622FRE6 is supplied in Tape & Reel (TR) configuration, while RN60D5622FB14 is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale and maintain identical electrical performance and physical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D5622FRE6 and RN60D5622FB14 maintain active product status and identical compliance classifications. Selection between these parts should be based on procurement and assembly requirements:

• RN60D5622FRE6 (Tape & Reel): Suitable for automated assembly processes and high-volume production runs where tape-and-reel packaging provides handling efficiency.
• RN60D5622FB14 (Bulk): Suitable for manual assembly, prototype builds, or applications where bulk packaging reduces per-unit cost for smaller quantities.

Both parts are RoHS non-compliant and REACH Affected, reflecting their military-grade classification. Compliance status is identical across both options.

Frequently Asked Questions (FAQ)

Q: Can RN60D5622FB14 be used as a direct replacement for RN60D5622FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk vs. Tape & Reel). Substitution is valid for any application where the RN60D5622FRE6 is specified, provided assembly equipment can accommodate the bulk packaging format.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components wound on continuous tape within a reel, optimized for automated pick-and-place assembly. Bulk packaging supplies loose components, typically in bags or trays, suitable for manual assembly or lower-volume applications.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts share identical resistance (56.2 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do both parts meet military specifications?

A: Yes. Both RN60D5622FRE6 and RN60D5622FB14 are classified under the military RN60 series (MIL-R-10509/1) with identical flame retardant coating, moisture resistance, and safety features.

Q: What are the physical dimensions of these resistors?

A: Both parts measure 0.145" diameter by 0.344" length (3.68mm x 8.74mm) in axial configuration. Physical dimensions are identical.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status. Compliance classifications are identical.