RN60D5113FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D5113FRE6 is a 511 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series per MIL-R-10509/1 specification, this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 793 units in stock. Substitute parts may be required due to packaging availability, supply chain considerations, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RN60D5113FRE6

Vishay DaleIn Stock: 900RN60D5113FRE6 Datasheet

Current PartRFQ

RN60D5113FB14

Vishay DaleIn Stock: 934RN60D5113FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D5113FRE6 and its substitute RN60D5113FB14 are functionally equivalent based on the following critical parameters that determine substitutability:

• Resistance value: 511 kOhms (identical)
• Tolerance: ±1% (identical)
• Power rating: 0.25W (identical)
• Composition: Metal Film (identical)
• Temperature coefficient: ±100ppm/°C (identical)
• Operating temperature range: -65°C to 175°C (identical)
• Package type: Axial (identical)
• Physical dimensions: 0.145" Dia × 0.344" L (identical)
• Series designation: RN60 Military grade (identical)
• Features: Flame retardant coating, military, moisture resistant, safety rated (identical)

The sole difference between these parts is packaging format: RN60D5113FRE6 is supplied in Tape & Reel (TR) configuration, while RN60D5113FB14 is supplied in Bulk packaging. Both maintain identical electrical performance and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D5113FRE6 and RN60D5113FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements:

• RN60D5113FRE6 (Tape & Reel): Suitable for automated assembly processes and high-volume production environments requiring reel-based component feeding.
• RN60D5113FB14 (Bulk): Suitable for manual assembly, low-volume applications, or procurement scenarios where bulk packaging is preferred.

Both parts maintain compliance with MIL-R-10509/1 military specification and carry identical RoHS non-compliant and REACH Affected designations. Component selection does not affect circuit performance, reliability, or operating characteristics.

Frequently Asked Questions (FAQ)

Q: Are RN60D5113FRE6 and RN60D5113FB14 electrically interchangeable?

A: Yes. Both parts are identical in resistance value (511 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C). Electrical performance is equivalent.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, designed for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in quantities suitable for manual handling and assembly. Both formats contain identical components.

Q: Can I substitute RN60D5113FB14 for RN60D5113FRE6 in an existing design?

A: Yes, provided your assembly process can accommodate bulk packaging. The components are mechanically and electrically identical. Assembly method compatibility is the only consideration.

Q: Do these parts meet military specifications?

A: Both parts are manufactured to MIL-R-10509/1 specification and are designated as military-grade components in the RN60 series. They feature flame retardant coating, moisture resistance, and safety-rated construction.

Q: What are the physical dimensions of these resistors?

A: Both parts measure 0.145" diameter × 0.344" length (3.68mm × 8.74mm) in axial configuration, ensuring identical PCB footprint and mounting requirements.