RN60D47R0FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D47R0FRE6 is a 47 Ohm, 1/4W metal film axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This through-hole component features flame retardant coating, moisture resistance, and safety-rated construction suitable for high-reliability electronic assemblies. The part is currently active in production with 967 units available in tape and reel packaging. Substitute parts are identified to address packaging format availability, inventory levels, and supply chain flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D47R0FRE6

Vishay DaleIn Stock: 978RN60D47R0FRE6 Datasheet

Current PartRFQ

RN60D47R0FB14

Vishay DaleIn Stock: 4166RN60D47R0FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D47R0FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 47 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package case: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Series compliance: Military, MIL-R-10509/1, RN60
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The identified substitute part RN60D47R0FB14 maintains complete electrical and mechanical equivalence. The only difference is packaging format: the main part is supplied in tape and reel (TR) configuration, while the substitute is supplied in bulk packaging. Both parts share identical base product number (RN60) and are manufactured by Vishay Dale under the same military specification.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D47R0FRE6 and RN60D47R0FB14 are active production parts with identical electrical performance and military specification compliance. Selection between these parts should be based on packaging requirements and supply availability:

• RN60D47R0FRE6: Select when tape and reel packaging is required for automated assembly processes or when specific procurement specifications mandate TR format.
• RN60D47R0FB14: Select when bulk packaging is acceptable and higher inventory availability (4156 units versus 967 units) is advantageous for supply chain continuity.

Both parts maintain RoHS non-compliant and REACH Affected status. Compliance requirements must be evaluated at the system level prior to component selection.

Frequently Asked Questions (FAQ)

Q: Can RN60D47R0FB14 be used as a direct replacement for RN60D47R0FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (bulk versus tape and reel). Substitution is valid provided the receiving assembly process can accommodate bulk packaging.

Q: What is the significance of the packaging difference between these parts?

A: Tape and reel (TR) packaging is optimized for automated pick-and-place assembly equipment. Bulk packaging is suitable for manual assembly or when tape and reel format is not required by manufacturing processes. The resistor component itself is identical in both formats.

Q: Are there any compliance differences between these substitute parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status. Compliance evaluation must be performed at the system or application level.

Q: What determines substitution eligibility for the RN60D47R0FRE6?

A: Substitution is valid only when all electrical parameters (resistance, tolerance, power rating, temperature coefficient, operating temperature range) and mechanical parameters (package type, physical dimensions, composition) remain identical. Packaging format and inventory levels do not affect electrical substitution eligibility.

Q: Is the RN60D47R0FB14 currently in production?

A: Yes. The RN60D47R0FB14 is an active production part with 4156 units in stock, providing reliable supply availability.