RN60D4753FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D4753FRE6 is a 475 kOhms ±1% metal film axial through-hole resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and compliance with MIL-R-10509/1 specifications. The part is currently active in production with 795 units in stock. Substitute parts are identified when packaging configurations differ while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across different assembly and inventory requirements.

Substiute Parts

RN60D4753FRE6

Vishay DaleIn Stock: 882RN60D4753FRE6 Datasheet

Current PartRFQ

RN60D4753FB14

Vishay DaleIn Stock: 1385RN60D4753FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D4753FRE6 and RN60D4753FB14 are direct electrical and mechanical equivalents within the RN60 military resistor series. Both parts share identical resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, and physical dimensions. The substitution is valid based on the following key parameters:

• Resistance: 475 kOhms (identical)
• Tolerance: ±1% (identical)
• Power Rating: 0.25W (identical)
• Temperature Coefficient: ±100ppm/°C (identical)
• Operating Temperature: -65°C to 175°C (identical)
• Physical Dimensions: 0.145" Dia x 0.344" L (identical)
• Composition: Metal Film (identical)
• Series Compliance: MIL-R-10509/1 (identical)

The only difference between these parts is the packaging configuration: RN60D4753FRE6 is supplied in Tape & Reel (TR) format, while RN60D4753FB14 is supplied in Bulk packaging. This distinction affects procurement, handling, and assembly processes but does not alter electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D4753FRE6 and RN60D4753FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

RN60D4753FRE6 (Tape & Reel) is suitable for automated assembly processes and high-volume production runs where tape-and-reel packaging provides efficient component feeding and handling.

RN60D4753FB14 (Bulk) is suitable for manual assembly, low-volume applications, or situations where bulk packaging reduces per-unit cost for smaller quantities.

Both parts maintain compliance with MIL-R-10509/1 military specifications and share identical RoHS and REACH status. Neither part is RoHS compliant, and both are REACH Affected. Component selection should account for regulatory requirements specific to the end application and geographic market.

Frequently Asked Questions (FAQ)

Q: Can RN60D4753FB14 be used as a direct replacement for RN60D4753FRE6 in circuit applications?

A: Yes. Both parts have identical electrical specifications (475 kOhms ±1%, 0.25W, ±100ppm/°C, -65°C to 175°C operating range) and physical dimensions (0.145" Dia x 0.344" L). The only difference is packaging format. Circuit performance is identical.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous tape wound on a reel, designed for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in a container, suitable for manual assembly or alternative handling methods. Electrical and mechanical properties are identical.

Q: Are there any compliance differences between these substitute parts?

A: No. Both parts share identical RoHS status (non-compliant) and REACH status (Affected). Both comply with MIL-R-10509/1 military specifications. Regulatory compliance is equivalent.

Q: Which part should be selected for automated assembly?

A: RN60D4753FRE6 (Tape & Reel) is optimized for automated assembly processes. The tape-and-reel format integrates directly with standard pick-and-place equipment.

Q: Which part should be selected for manual assembly or prototyping?

A: RN60D4753FB14 (Bulk) is suitable for manual assembly, prototyping, or low-volume applications where bulk packaging is more practical.