RN60D4322FBSL Equivalent & Substitute Parts

Part Overview

The RN60D4322FBSL is a 43.2 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale and complies with military specification MIL-R-10509/1. The part features flame retardant coating, moisture resistance, and safety-grade construction suitable for military and aerospace applications. As an active product with 1021 units in stock, substitute parts may be required for procurement flexibility, supply chain continuity, or specific application requirements.

Substiute Parts

RN60D4322FBSL

Vishay DaleIn Stock: 1069RN60D4322FBSL Datasheet

Current PartRFQ

RN60D4322FB14

Vishay DaleIn Stock: 1196RN60D4322FB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D4322FBSL is determined by strict equivalence across the following critical parameters:

• Resistance value: 43.2 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package: Axial through-hole (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Military compliance: MIL-R-10509/1 series (exact match required)

The RN60D4322FB14 meets all substitution criteria as a parametric equivalent within the RN60 military resistor series.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D4322FBSL and RN60D4322FB14 are active products manufactured by Vishay Dale within the military-grade RN60 resistor series. Selection between these parts should be based on:

• Inventory availability and procurement lead times
• Supply chain requirements and vendor qualification status
• Compliance documentation requirements for specific applications
• Cost considerations where applicable

Both parts maintain identical electrical and mechanical specifications, military compliance certifications, and environmental ratings. No performance differential exists between the two part numbers.

Frequently Asked Questions (FAQ)

Q: Can RN60D4322FB14 be used as a direct replacement for RN60D4322FBSL?

A: Yes. Both parts are parametric equivalents with identical resistance, tolerance, power rating, temperature coefficient, operating temperature range, package configuration, and military compliance specifications.

Q: Are there any differences in physical dimensions between these parts?

A: No. Both parts share identical axial package dimensions of 0.145" diameter by 0.344" length (3.68mm x 8.74mm).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts comply with MIL-R-10509/1 military specification and are part of the RN60 series.

Q: What is the difference between RN60D4322FBSL and RN60D4322FB14?

A: The part numbers differ only in their suffix designation. All electrical, mechanical, and compliance parameters are identical.

Q: Are these parts RoHS compliant?

A: No. Both RN60D4322FBSL and RN60D4322FB14 are RoHS non-compliant.

Q: What is the REACH status of these resistors?

A: Both parts are REACH Affected.