RN60D4301FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D4301FRE6 is a 4.3 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part maintains active product status with 986 units currently in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility without functional compromise.

Substiute Parts

RN60D4301FRE6

Vishay DaleIn Stock: 1043RN60D4301FRE6 Datasheet

Current PartRFQ

RN60D4301FB14

Vishay DaleIn Stock: 1624RN60D4301FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D4301FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 4.3 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package type: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Series: RN60 (MIL-R-10509/1)
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)

The identified substitute part RN60D4301FB14 maintains identical electrical and mechanical specifications. The only difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale under the same military RN60 series designation and share all functional and dimensional characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D4301FRE6 and RN60D4301FB14 are active products manufactured by Vishay Dale with identical electrical performance and military-grade specifications. Selection between these parts is determined by procurement and assembly requirements:

The RN60D4301FRE6 in Tape & Reel packaging is suitable for automated assembly processes and high-volume production environments where component feeding and placement automation is utilized.

The RN60D4301FB14 in Bulk packaging is suitable for manual assembly, low-volume production, repair operations, and applications where automated handling is not required.

Both parts maintain equivalent compliance status: RoHS non-compliant and REACH Affected. Inventory availability differs, with RN60D4301FB14 currently stocked at 1524 units compared to 986 units for RN60D4301FRE6.

Frequently Asked Questions (FAQ)

Q: Can RN60D4301FB14 be used as a direct replacement for RN60D4301FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Functional performance, electrical characteristics, and physical dimensions are equivalent.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, designed for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in containers, suitable for manual handling and assembly. Both formats contain the same component.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected.

Q: Which part should be selected for automated assembly?

A: RN60D4301FRE6 in Tape & Reel format is designed for automated assembly processes and is the standard choice for high-volume production.

Q: Which part should be selected for manual assembly or repair?

A: RN60D4301FB14 in Bulk packaging is suitable for manual assembly, repair operations, and low-volume applications.

Q: Do these parts meet military specifications?

A: Yes. Both parts are manufactured under the military RN60 series designation and comply with MIL-R-10509/1 specifications.