RN60D33R2FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D33R2FRE6 is a 33.2 Ohm ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This military-grade component features flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/1 specification. The part is currently active in production with 886 units in stock. Substitute parts are identified to address packaging format availability and specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60D33R2FRE6

Vishay DaleIn Stock: 992RN60D33R2FRE6 Datasheet

Current PartRFQ

RN60C33R2FB14

Vishay DaleIn Stock: 812RN60C33R2FB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D33R2FRE6 is determined by the following critical parameters:

• Resistance value: 33.2 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package: Axial through-hole (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Physical dimensions: 0.145" Dia x 0.344" L (exact match required)
• Military specification compliance: MIL-R-10509/1 (exact match required)

The RN60C33R2FB14 qualifies as a direct substitute based on identical electrical specifications, composition, temperature range, and physical dimensions. The primary difference is packaging format (Bulk versus Tape & Reel) and temperature coefficient specification (±50ppm/°C versus ±100ppm/°C), both of which fall within acceptable substitution parameters for this component category.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D33R2FRE6 and RN60C33R2FB14 are active production components from Vishay Dale with identical electrical performance, military specification compliance, and environmental ratings. Selection between these parts is determined by packaging requirements:

• RN60D33R2FRE6: Select when Tape & Reel packaging is required for automated assembly processes
• RN60C33R2FB14: Select when Bulk packaging is acceptable or preferred for manual assembly or lower-volume applications

Both parts maintain RoHS non-compliant and REACH Affected status. Compliance requirements must be evaluated at the system level. The improved temperature coefficient of RN60C33R2FB14 (±50ppm/°C versus ±100ppm/°C) provides enhanced stability in temperature-sensitive applications while maintaining full military specification compliance.

Frequently Asked Questions (FAQ)

Q: Can RN60C33R2FB14 replace RN60D33R2FRE6 in existing designs?

A: Yes. Both parts are electrically and mechanically identical with matching resistance, tolerance, power rating, temperature range, and physical dimensions. The substitute differs only in packaging format and temperature coefficient specification.

Q: What is the primary difference between these two parts?

A: The main difference is packaging format. RN60D33R2FRE6 is supplied in Tape & Reel format suitable for automated pick-and-place assembly. RN60C33R2FB14 is supplied in Bulk format. Additionally, RN60C33R2FB14 has a tighter temperature coefficient (±50ppm/°C versus ±100ppm/°C).

Q: Are both parts military-grade components?

A: Yes. Both parts comply with MIL-R-10509/1 military specification and feature flame retardant coating, moisture resistance, and safety certification.

Q: What packaging considerations apply to these parts?

A: RN60D33R2FRE6 in Tape & Reel format is optimized for high-volume automated assembly with component feeders. RN60C33R2FB14 in Bulk format is suitable for manual assembly, prototyping, or applications where automated handling is not required.

Q: Do these parts have different compliance statuses?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status. System-level compliance assessment is required for applications with specific regulatory requirements.