RN60D3320FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D3320FRE6 is a 332 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety characteristics suitable for demanding applications. The part is currently active in production with 665 pieces available in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format or inventory availability requires alternatives.

Substiute Parts

RN60D3320FRE6

Vishay DaleIn Stock: 754RN60D3320FRE6 Datasheet

Current PartRFQ

RN60D3320FB14

Vishay DaleIn Stock: 956RN60D3320FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D3320FRE6 is determined by the following critical parameters:

• Resistance value: 332 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Series compliance: Military, MIL-R-10509/1, RN60
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The substitute part RN60D3320FB14 meets all electrical and mechanical specifications. The primary difference is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts share identical electrical characteristics, physical dimensions, and military-grade specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D3320FRE6 and RN60D3320FB14 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and procurement logistics:

• RN60D3320FRE6 (Tape & Reel): Suitable for automated assembly processes and high-volume production runs
• RN60D3320FB14 (Bulk): Suitable for manual assembly, prototyping, or applications where tape-and-reel packaging is not required

Both parts maintain compliance with military specifications (MIL-R-10509/1) and share identical RoHS and REACH status. No functional or performance differences exist between these parts.

Frequently Asked Questions (FAQ)

Q: Can RN60D3320FB14 be used as a direct replacement for RN60D3320FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk vs. Tape & Reel). Functional performance in the circuit is identical.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts have identical resistance (332 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do both parts meet military specifications?

A: Yes. Both parts comply with MIL-R-10509/1 and are part of the military-grade RN60 series with flame retardant coating, moisture resistance, and safety features.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging is designed for automated pick-and-place assembly equipment. Bulk packaging consists of loose components suitable for manual assembly or small-quantity applications.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical axial dimensions of 0.145" Dia x 0.344" L (3.68mm x 8.74mm) and will fit the same PCB footprints and through-hole positions.

Q: What is the compliance status for both parts?

A: Both parts are RoHS non-compliant and REACH Affected. They share identical regulatory status.