RN60D3300FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D3300FRE6 is a 330 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale, designed for military and aerospace applications. This axial component features flame retardant coating, moisture resistance, and compliance with MIL-R-10509/1 specifications. The part is currently in active production status with 1134 units available in tape and reel packaging. Substitute parts are identified when packaging format changes or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical performance.

Substiute Parts

RN60D3300FRE6

Vishay DaleIn Stock: 1215RN60D3300FRE6 Datasheet

Current PartRFQ

RN60D3300FB14

Vishay DaleIn Stock: 5319RN60D3300FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D3300FB14 qualifies as a direct substitute for the RN60D3300FRE6 based on the following criteria:

Identical Electrical Parameters:

• Resistance value: 330 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C

Identical Mechanical Parameters:

• Composition: Metal Film
• Package type: Axial
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Number of terminations: 2

Identical Compliance & Features:

• Series: Military, MIL-R-10509/1, RN60
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety
• RoHS Status: RoHS non-compliant
• REACH Status: REACH Affected
• ECCN: EAR99
• HTSUS: 8533.21.0090

The only difference between these parts is the packaging format: RN60D3300FRE6 is supplied in tape and reel (TR) format, while RN60D3300FB14 is supplied in bulk packaging. This distinction affects procurement and handling but does not alter component performance or application suitability.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D3300FRE6 and RN60D3300FB14 are active production components from Vishay Dale's military-grade RN60 series. Selection between these parts should be based on procurement and assembly requirements:

RN60D3300FRE6 (Tape & Reel): Suitable for automated assembly processes requiring tape and reel packaging. Recommended for high-volume production environments with pick-and-place equipment.

RN60D3300FB14 (Bulk): Suitable for manual assembly, repair, or low-volume applications where bulk packaging is acceptable. Higher inventory availability (5216 units) may support extended lead time requirements.

Both parts maintain identical electrical performance, military compliance, and environmental specifications. The choice between them is determined by assembly methodology and packaging logistics, not by component performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can RN60D3300FB14 be used as a direct replacement for RN60D3300FRE6 in production?

A: Yes. Both parts are electrically and mechanically identical. The substitution is valid provided the assembly process can accommodate bulk packaging instead of tape and reel format.

Q: Are there any performance differences between tape and reel versus bulk packaging?

A: No. Packaging format affects handling and assembly methodology only. Component performance, electrical characteristics, and reliability are identical.

Q: Do both parts meet the same military specifications?

A: Yes. Both RN60D3300FRE6 and RN60D3300FB14 comply with MIL-R-10509/1 and carry identical military-grade certifications, features, and environmental ratings.

Q: What is the temperature coefficient tolerance for these resistors?

A: The temperature coefficient is ±100ppm/°C for both parts, ensuring stable performance across the -65°C to 175°C operating range.

Q: Are these parts RoHS compliant?

A: No. Both RN60D3300FRE6 and RN60D3300FB14 are RoHS non-compliant. They are REACH Affected and classified under ECCN EAR99.

Q: Can these 330 Ohm resistors be used in applications requiring different resistance values?

A: No. These components are specified for 330 Ohm applications only. Different resistance values require different part numbers within the RN60 series.