RN60D3241FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D3241FRE6 is a 3.24 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 809 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across supply chain variations.

Substiute Parts

RN60D3241FRE6

Vishay DaleIn Stock: 881RN60D3241FRE6 Datasheet

Current PartRFQ

RN60D3241FB14

Vishay DaleIn Stock: 1164RN60D3241FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D3241FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 3.24 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W/1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package type: Axial (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Series classification: Military, MIL-R-10509/1, RN60 (exact match required)

The primary variable distinguishing substitute parts is packaging format (Tape & Reel versus Bulk). All electrical characteristics, mechanical dimensions, and performance specifications remain identical across qualified substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D3241FRE6 and RN60D3241FB14 are active production components manufactured by Vishay Dale with identical electrical performance and mechanical specifications. Selection between these parts is determined by packaging requirements and supply chain logistics:

RN60D3241FRE6 (Tape & Reel) is suitable for automated assembly processes requiring continuous reel-fed component delivery. RN60D3241FB14 (Bulk) is appropriate for manual assembly, kit builds, or applications where individual component handling is standard practice.

Both parts carry identical compliance status: RoHS non-compliant and REACH Affected. Military-grade construction (MIL-R-10509/1) and flame retardant coating are maintained across both variants. Current inventory levels support either selection without supply constraints.

Frequently Asked Questions (FAQ)

Q: Can RN60D3241FB14 directly replace RN60D3241FRE6 in production?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid provided assembly equipment can accommodate the packaging type.

Q: What is the primary difference between these substitute parts?

A: Packaging format only. RN60D3241FRE6 arrives in Tape & Reel configuration for automated pick-and-place assembly. RN60D3241FB14 arrives in Bulk format for manual handling or alternative assembly methods. All electrical specifications, physical dimensions, and performance characteristics are identical.

Q: Are there any compliance differences between the two parts?

A: No. Both parts share identical RoHS and REACH status. Both are classified as RoHS non-compliant and REACH Affected. Military-grade specifications and certifications are equivalent.

Q: Which part should be selected for high-volume automated assembly?

A: RN60D3241FRE6 (Tape & Reel) is optimized for automated assembly processes. RN60D3241FB14 (Bulk) is not suitable for continuous reel-fed automation.

Q: Are the physical dimensions identical between substitute parts?

A: Yes. Both parts measure 0.145" Dia × 0.344" L (3.68mm × 8.74mm). PCB footprint and mounting requirements are identical.

Q: Can these parts be intermixed in the same assembly?

A: Yes, provided assembly processes accommodate both packaging formats. Electrical and mechanical performance are identical, so circuit functionality is unaffected by which variant is used.