RN60D3160FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D3160FRE6 is a 316 Ohms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series, this component features flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/1 specification. The part is currently active in production with 675 units in stock. Substitute parts may be required due to packaging format availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RN60D3160FRE6

Vishay DaleIn Stock: 693RN60D3160FRE6 Datasheet

Current PartRFQ

RN60D3160FB14

Vishay DaleIn Stock: 1063RN60D3160FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D3160FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 316 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package configuration: Axial through-hole (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Series: RN60 military-grade classification (exact match required)

The primary variable between the main part and substitute is packaging format: the RN60D3160FRE6 is supplied in Tape & Reel (TR) format, while the substitute RN60D3160FB14 is supplied in Bulk format. Both parts are manufactured by Vishay Dale and maintain identical electrical performance and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D3160FRE6 and RN60D3160FB14 are active production components from Vishay Dale with identical electrical specifications and mechanical form factors. Selection between these parts should be based on packaging requirements and procurement workflow:

The RN60D3160FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments where component feeding systems require reel-based packaging.

The RN60D3160FB14 in Bulk format is suitable for manual assembly, low-volume production, or applications where reel packaging is not required.

Both parts maintain equivalent compliance status: RoHS non-compliant and REACH Affected. Component selection should account for end-application regulatory requirements and supply chain constraints.

Frequently Asked Questions (FAQ)

Q: Can RN60D3160FB14 (Bulk) be used as a direct replacement for RN60D3160FRE6 (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. Substitution is valid provided the receiving assembly process can accommodate bulk-packaged components.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts share identical resistance value (316 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do both parts meet the same military specifications?

A: Yes. Both parts are classified under the RN60 military-grade series and comply with MIL-R-10509/1 specification.

Q: What is the primary reason to substitute between these part numbers?

A: Packaging format availability. The Tape & Reel format (RN60D3160FRE6) is optimized for automated pick-and-place assembly, while the Bulk format (RN60D3160FB14) is suitable for manual assembly or alternative procurement workflows.

Q: Are there any compliance differences between the two parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status.

Q: Can these parts be used interchangeably in circuit design?

A: Yes. From an electrical and thermal performance perspective, these parts are fully interchangeable. Circuit design and performance will be identical regardless of which part number is used.