RN60D2500FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D2500FRE6 is a 250 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This axial component features flame retardant coating, moisture resistance, and safety-rated construction suitable for high-reliability electronic assemblies. The part is currently active in production with 744 units available in tape and reel packaging. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D2500FRE6

Vishay DaleIn Stock: 848RN60D2500FRE6 Datasheet

Current PartRFQ

RN60D2500FB14

Vishay DaleIn Stock: 7310RN60D2500FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D2500FB14 qualifies as a direct substitute based on identical electrical and mechanical parameters. Substitution is valid because both parts share the following critical specifications:

• Resistance value: 250 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Series designation: Military, MIL-R-10509/1, RN60
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The only difference between the main part and substitute is the packaging format: RN60D2500FRE6 is supplied in tape and reel (TR), while RN60D2500FB14 is supplied in bulk. Both maintain identical component specifications and performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D2500FRE6 and RN60D2500FB14 are active production parts from Vishay Dale with identical electrical performance and mechanical compatibility. Selection between these parts should be based on packaging requirements and assembly process specifications:

• RN60D2500FRE6 (Tape & Reel): Suitable for automated pick-and-place assembly operations requiring continuous tape-fed component delivery.
• RN60D2500FB14 (Bulk): Suitable for manual assembly, kit builds, or applications where tape packaging is not required.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. Military specification compliance (MIL-R-10509/1) is maintained across both variants. Component selection should align with assembly methodology and supply chain logistics rather than electrical or mechanical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can RN60D2500FB14 be used as a direct replacement for RN60D2500FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (bulk versus tape and reel). Substitution is valid for any application where the component specifications match the circuit requirements.

Q: What is the difference between tape and reel packaging and bulk packaging?

A: Tape and reel (TR) packaging supplies components on a continuous carrier tape wound on a reel, designed for automated assembly equipment. Bulk packaging supplies loose components in a container, suitable for manual assembly or kit applications. The component itself is identical in both formats.

Q: Are there any performance differences between these two part numbers?

A: No. Both parts have identical resistance value (250 Ohms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), and all other electrical and mechanical specifications.

Q: Which part should I select for my application?

A: Selection depends on your assembly process. If using automated pick-and-place equipment, specify RN60D2500FRE6 (tape and reel). If performing manual assembly or building component kits, RN60D2500FB14 (bulk) may be more practical. Both are functionally equivalent.

Q: Do both parts meet military specifications?

A: Yes. Both RN60D2500FRE6 and RN60D2500FB14 are manufactured to MIL-R-10509/1 specification and are part of the military-grade RN60 series.

Q: What is the inventory status for these parts?

A: RN60D2500FRE6 has 744 units in stock (tape and reel). RN60D2500FB14 has 7214 units in stock (bulk). Availability may vary based on current demand and supply chain conditions.