Equivalent & Substitute Parts for RN60D2430FRE6

Part Overview

The RN60D2430FRE6 is a 243 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This axial component features flame retardant coating, moisture resistance, and safety-rated construction. The part is currently active in production with 697 pieces available in tape and reel packaging. Substitute parts are identified based on matching electrical specifications and compatible mechanical form factors while accounting for packaging and performance variations.

Substiute Parts

RN60D2430FRE6

Vishay DaleIn Stock: 807RN60D2430FRE6 Datasheet

Current PartRFQ

RN60D2430FB14

Vishay DaleIn Stock: 1096RN60D2430FB14 Datasheet

DirectRFQ

RN60C2430FB14

Vishay DaleIn Stock: 1230RN60C2430FB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D2430FRE6 is determined by the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 243 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Operating temperature range: -65°C to 175°C
• Series compliance: RN60, MIL-R-10509/1

Mechanical Parameters (Must Match):

• Package type: Axial
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Number of terminations: 2

Allowable Variations:

• Packaging format (Tape & Reel vs. Bulk)
• Temperature coefficient (within military specification limits)

The identified substitutes maintain identical electrical and mechanical specifications while differing only in packaging configuration and temperature coefficient performance.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active production status and comply with MIL-R-10509/1 military specification requirements. Selection between RN60D2430FRE6, RN60D2430FB14, and RN60C2430FB14 depends on application-specific requirements:

RN60D2430FRE6 is suitable for applications requiring tape and reel packaging for automated assembly processes. The ±100ppm/°C temperature coefficient is appropriate for general military applications within the specified temperature range.

RN60D2430FB14 provides identical electrical performance in bulk packaging format, offering flexibility for manual assembly or lower-volume production runs. Temperature coefficient remains at ±100ppm/°C.

RN60C2430FB14 offers improved temperature stability with a ±50ppm/°C temperature coefficient while maintaining all other electrical and mechanical specifications. This variant is suitable for applications requiring tighter frequency stability or precision measurement circuits operating across the full temperature range.

All parts share identical RoHS non-compliance status, REACH affected designation, and compliance codes (ECCN: EAR99, HTSUS: 8533.21.0090).

Frequently Asked Questions (FAQ)

Q: Can RN60D2430FB14 replace RN60D2430FRE6 in production assembly?

A: Yes. Both parts are electrically and mechanically identical. The primary difference is packaging format: RN60D2430FRE6 is supplied in tape and reel configuration suitable for automated pick-and-place equipment, while RN60D2430FB14 is supplied in bulk format. Substitution requires manual handling procedures instead of automated tape feeding.

Q: What is the significance of the temperature coefficient difference between RN60D2430FRE6 and RN60C2430FB14?

A: The RN60C2430FB14 features a ±50ppm/°C temperature coefficient compared to ±100ppm/°C for RN60D2430FRE6. This means the resistance value of RN60C2430FB14 changes more slowly with temperature variations. For applications operating across the full -65°C to 175°C range, this improved stability may reduce circuit performance drift.

Q: Are all three parts MIL-R-10509/1 compliant?

A: Yes. All three parts conform to MIL-R-10509/1 military specification and are part of the RN60 series. They share identical flame retardant coating, moisture resistance, and safety features.

Q: What packaging considerations apply when switching between these parts?

A: RN60D2430FRE6 arrives in tape and reel format optimized for automated assembly lines. RN60D2430FB14 and RN60C2430FB14 are supplied in bulk packaging, requiring manual component handling and placement. Assembly process modifications may be necessary depending on production equipment capabilities.

Q: Can RN60C2430FB14 be used as a direct replacement for RN60D2430FRE6?

A: Yes, with consideration for temperature coefficient performance. RN60C2430FB14 provides superior temperature stability (±50ppm/°C vs. ±100ppm/°C) and is mechanically and electrically compatible. The improved temperature coefficient may benefit precision applications but is not required for general military applications.