RN60D2373FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D2373FRE6 is a 237 kOhm ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating and moisture-resistant construction suitable for military and high-reliability applications. The part is currently active in production with 1011 units in stock. Substitute parts may be required due to packaging availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D2373FRE6

Vishay DaleIn Stock: 1043RN60D2373FRE6 Datasheet

Current PartRFQ

RN60D2373FB14

Vishay DaleIn Stock: 1214RN60D2373FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN60D2373FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 237 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W/1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package: Axial through-hole (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Series designation: RN60, MIL-R-10509/1 (exact match required)
• Physical dimensions: 0.145" Dia x 0.344" L (exact match required)

The primary variable distinguishing substitute parts is packaging format (Tape & Reel versus Bulk), which does not affect electrical or mechanical performance. All substitute parts must maintain identical electrical characteristics and physical form factor.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D2373FRE6 and RN60D2373FB14 are active production components manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and procurement logistics rather than technical performance.

The RN60D2373FRE6 in Tape & Reel packaging is suitable for automated assembly processes and high-volume production environments. The RN60D2373FB14 in Bulk packaging is appropriate for manual assembly, repair operations, or applications where individual component handling is required.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. Component selection should account for assembly methodology, inventory management practices, and supply chain availability rather than functional differences.

Frequently Asked Questions (FAQ)

Q: Can RN60D2373FB14 be used as a direct replacement for RN60D2373FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Direct substitution is valid for any application where the RN60D2373FRE6 is specified, provided assembly equipment compatibility with the Bulk package format is confirmed.

Q: What is the significance of the packaging difference between these parts?

A: Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment. Bulk packaging contains loose components suitable for manual assembly or hand-soldering applications. Electrical and mechanical performance are identical.

Q: Are there any compliance or certification differences between these substitute parts?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected. Compliance considerations do not differentiate these parts.

Q: What parameters must remain identical for valid substitution?

A: Resistance value (237 kOhms), tolerance (±1%), power rating (0.25W), composition (Metal Film), package type (Axial), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), and physical dimensions (0.145" Dia x 0.344" L) must all remain unchanged for valid substitution.

Q: Can these parts be used interchangeably in military applications?

A: Yes. Both parts are manufactured to MIL-R-10509/1 specifications within the RN60 military series. Military qualification applies equally to both packaging formats.