RN60D2003FRSL Equivalent & Substitute Parts

Part Overview

The RN60D2003FRSL is a 200 kOhms ±1% metal film axial resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, designed to MIL-R-10509/1 specifications with flame retardant coating and moisture resistance. The part is currently active in production with 686 units in stock. Substitute parts are identified when packaging formats differ or when equivalent electrical performance is required for alternative sourcing strategies.

Substiute Parts

RN60D2003FRSL

Vishay DaleIn Stock: 696RN60D2003FRSL Datasheet

Current PartRFQ

RN60D2003FB14

Vishay DaleIn Stock: 2091RN60D2003FB14 Datasheet

DirectRFQ

RN60C2003FRE6

Vishay DaleIn Stock: 2965RN60C2003FRE6 Datasheet

UpgradeRFQ

RN60D2003FRE6

Vishay DaleIn Stock: 1590RN60D2003FRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D2003FRSL is determined by matching the following critical parameters: resistance value (200 kOhms), tolerance (±1%), power rating (0.25W), composition (metal film), operating temperature range (-65°C to 175°C), package type (axial), and physical dimensions (0.145" Dia x 0.344" L). All identified substitutes maintain these core electrical and mechanical specifications. Packaging format differences (Tape & Reel versus Bulk versus Cut Tape) do not affect electrical performance and represent alternative distribution methods. Temperature coefficient variations within the RN60 series do not preclude substitution when the primary electrical parameters remain constant.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain identical electrical specifications and are manufactured by Vishay Dale within the same military-grade RN60 series. Selection between RN60D2003FRSL, RN60D2003FB14, RN60C2003FRE6, and RN60D2003FRE6 should be based on packaging and distribution requirements rather than electrical performance. The RN60C2003FRE6 offers a tighter temperature coefficient specification (±50ppm/°C versus ±100ppm/°C), which may provide enhanced stability in temperature-sensitive applications. All parts are active products with current manufacturing status and comply with identical regulatory frameworks (RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8533.21.0090).

Frequently Asked Questions (FAQ)

Q: Can RN60D2003FB14 (Bulk packaging) be used as a direct replacement for RN60D2003FRSL (Tape & Reel)?

A: Yes. The electrical and mechanical specifications are identical. The difference is packaging format only. RN60D2003FB14 is supplied in bulk form rather than tape and reel, which affects handling and assembly processes but not component performance.

Q: What is the difference between RN60C2003FRE6 and RN60D2003FRE6?

A: Both parts are electrically equivalent with identical resistance, tolerance, power rating, and operating temperature range. The primary difference is temperature coefficient: RN60C2003FRE6 specifies ±50ppm/°C while RN60D2003FRE6 specifies ±100ppm/°C. Both are supplied in Cut Tape (CT) packaging format.

Q: Are all substitute parts military-grade components?

A: Yes. All listed substitutes are part of the military-grade RN60 series designed to MIL-R-10509/1 specifications with flame retardant coating and moisture resistance features.

Q: What packaging formats are available for the 200 kOhms ±1% 1/4W axial resistor?

A: Three packaging formats are available: Tape & Reel (RN60D2003FRSL), Bulk (RN60D2003FB14), and Cut Tape (RN60C2003FRE6 and RN60D2003FRE6).

Q: Do all substitute parts have the same physical dimensions?

A: Yes. All parts maintain identical axial package dimensions of 0.145" Dia x 0.344" L (3.68mm x 8.74mm), ensuring mechanical compatibility in circuit board layouts.