RN60D2000FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D2000FRE6 is a 200 Ohm, 1/4W metal film axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This component features flame retardant coating, moisture resistance, and safety-rated construction suitable for high-reliability electronic assemblies. The part is currently active in production with 1586 units in stock. Substitute parts are identified when packaging format, inventory availability, or enhanced performance specifications are required for specific application requirements.

Substiute Parts

RN60D2000FRE6

Vishay DaleIn Stock: 1630RN60D2000FRE6 Datasheet

Current PartRFQ

RN60D2000FB14

Vishay DaleIn Stock: 1775RN60D2000FB14 Datasheet

DirectRFQ

RN60C2000FB14

Vishay DaleIn Stock: 1726RN60C2000FB14 Datasheet

UpgradeRFQ

RN60C2000FRE6

Vishay DaleIn Stock: 6550RN60C2000FRE6 Datasheet

UpgradeRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60D2000FRE6 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 200 Ohms
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.145" Dia × 0.344" L

Allowable Variations:

• Tolerance: ±1% or tighter (±0.1%)
• Temperature coefficient: ±100ppm/°C or lower (±50ppm/°C, ±25ppm/°C)
• Packaging format: Cut Tape (CT) or Bulk
• Inventory status: Active production

All substitute parts maintain the military specification MIL-R-10509/1 classification, flame retardant coating, and moisture-resistant construction required for equivalent functionality.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (Identical Specifications): RN60D2000FB14 provides equivalent electrical and thermal performance with identical tolerance and temperature coefficient specifications. Selection between RN60D2000FRE6 and RN60D2000FB14 depends solely on packaging format requirements: Cut Tape for automated assembly processes or Bulk for manual assembly operations.

Enhanced Performance Substitutes: RN60C2000FB14 and RN60C2000FRE6 offer improved temperature stability with ±50ppm/°C coefficient, suitable for applications requiring tighter thermal drift control. These parts maintain all other electrical specifications and military compliance. Selection between these variants follows the same packaging format logic as the direct substitutes.

Premium Grade Substitute: RN60E2000BB14 provides the highest precision grade with ±0.1% tolerance and ±25ppm/°C temperature coefficient. This part is specified for applications requiring superior accuracy and minimal thermal drift. Bulk packaging format is the only available option for this grade.

All substitute parts maintain active production status, RoHS non-compliant classification, REACH affected status, and identical compliance certifications (ECCN: EAR99, HTSUS: 8533.21.0090).

Frequently Asked Questions (FAQ)

Q: Can RN60D2000FB14 replace RN60D2000FRE6 in my assembly? A: Yes. Both parts have identical electrical specifications (200 Ω, ±1%, 0.25W, ±100ppm/°C). The only difference is packaging format: RN60D2000FRE6 is supplied in Cut Tape, while RN60D2000FB14 is supplied in Bulk. Compatibility depends on your assembly equipment capability.

Q: What is the difference between the RN60C and RN60D series variants? A: The RN60C series offers improved temperature stability with ±50ppm/°C coefficient compared to the RN60D series at ±100ppm/°C. All other electrical and mechanical parameters remain identical. Selection depends on thermal drift requirements for your specific application.

Q: Is RN60E2000BB14 a direct replacement for RN60D2000FRE6? A: RN60E2000BB14 is electrically compatible but represents an upgrade specification with ±0.1% tolerance and ±25ppm/°C temperature coefficient versus ±1% and ±100ppm/°C for the original part. It is suitable for higher-precision applications but is only available in Bulk packaging.

Q: Do all substitute parts meet the same military specifications? A: Yes. All listed substitute parts comply with MIL-R-10509/1 military specification, feature flame retardant coating, moisture-resistant construction, and identical operating temperature range (-65°C to 175°C).

Q: What packaging format should I select? A: Cut Tape (CT) format is optimized for automated pick-and-place assembly systems. Bulk format is suitable for manual assembly or reel-fed processes. Electrical performance is identical between packaging formats.