RN60D1R00FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1R00FRE6 is a 1 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale, designed for military and high-reliability applications. This axial resistor features flame retardant coating, moisture resistance, and meets MIL-R-10509/1 specifications. The part is currently active in production with 970 units in stock. Substitute parts are identified to provide procurement flexibility while maintaining electrical and mechanical compatibility for applications requiring equivalent performance characteristics.

Substiute Parts

RN60D1R00FRE6

Vishay DaleIn Stock: 1005RN60D1R00FRE6 Datasheet

Current PartRFQ

RN60D1R00FB14

Vishay DaleIn Stock: 1025RN60D1R00FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D1R00FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 1 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package type: Axial
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Series compliance: MIL-R-10509/1, RN60 base product

The identified substitute part maintains identical electrical specifications and mechanical form factor. The only permitted variation is packaging format (Tape & Reel versus Bulk), which does not affect component performance or circuit functionality.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D1R00FRE6 and RN60D1R00FB14 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement requirements:

The RN60D1R00FRE6 is supplied in Tape & Reel format, suitable for automated assembly processes and high-volume production environments. The RN60D1R00FB14 is supplied in Bulk packaging, appropriate for manual assembly, repair operations, or lower-volume applications.

Both parts maintain equivalent performance in military and high-reliability circuit applications. Compliance status is identical: both are RoHS non-compliant and REACH Affected. No electrical or thermal performance differences exist between these parts.

Frequently Asked Questions (FAQ)

Q: Can RN60D1R00FB14 be used as a direct replacement for RN60D1R00FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Circuit performance, reliability, and specifications are equivalent.

Q: Does packaging format affect component performance?

A: No. Packaging format (Tape & Reel or Bulk) is a supply and handling specification only. It does not affect electrical characteristics, thermal performance, or circuit functionality.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected.

Q: What determines substitution eligibility for this resistor?

A: Substitution is based on matching resistance value (1 Ohms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), package type (Axial), physical dimensions (0.145" Dia × 0.344" L), and series compliance (MIL-R-10509/1, RN60).

Q: Can I substitute a different resistance value or tolerance?

A: No. Substitution is limited to parts with identical electrical specifications. Different resistance values or tolerances are not equivalent and require separate component selection.

Q: Is the RN60D1R00FB14 suitable for automated assembly?

A: The RN60D1R00FB14 is supplied in Bulk packaging. For automated assembly processes, the Tape & Reel format (RN60D1R00FRE6) is the standard choice. Bulk packaging is typically used for manual assembly or repair applications.