RN60D1743FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1743FRE6 is a 174 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety certification suitable for military applications. The part is currently active in production with 992 pieces available in tape and reel packaging. Substitute parts may be required due to packaging format availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D1743FRE6

Vishay DaleIn Stock: 1015RN60D1743FRE6 Datasheet

Current PartRFQ

RN60D1743FB14

Vishay DaleIn Stock: 1937RN60D1743FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D1743FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 174 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Package configuration: Axial (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Series: RN60 military grade (exact match required)

The RN60D1743FB14 qualifies as a direct substitute based on identical electrical specifications, composition, temperature characteristics, and physical dimensions. The only difference is packaging format: the main part is supplied in tape and reel (TR) configuration, while the substitute is supplied in bulk packaging. Both parts maintain the same base product number (RN60) and military-grade classification.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D1743FRE6 and RN60D1743FB14 are active production parts from Vishay Dale with identical electrical, thermal, and mechanical specifications. Selection between these parts is determined by packaging requirements and procurement logistics:

The RN60D1743FRE6 in tape and reel format is suitable for automated assembly processes and high-volume production environments where component feeding systems require standardized reel packaging.

The RN60D1743FB14 in bulk packaging is suitable for manual assembly, low-volume production, or applications where tape and reel format is not required.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected, with EAR99 export classification and HTSUS code 8533.21.0090. The substitute part offers higher current inventory availability (1840 pieces versus 992 pieces), which may be relevant for supply chain planning.

Frequently Asked Questions (FAQ)

Q: Can RN60D1743FB14 be used as a direct replacement for RN60D1743FRE6?

A: Yes. Both parts are electrically and mechanically identical with 174 kOhms resistance, ±1% tolerance, 0.25W power rating, metal film composition, and identical physical dimensions. The only difference is packaging format (bulk versus tape and reel).

Q: What is the primary difference between these two part numbers?

A: The packaging format differs. RN60D1743FRE6 is supplied in tape and reel (TR) configuration for automated assembly. RN60D1743FB14 is supplied in bulk packaging for manual assembly or non-automated processes.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts have identical resistance value, tolerance, power rating, temperature coefficient, and operating temperature range. Electrical performance is equivalent.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both parts share identical RoHS status (non-compliant), REACH status (Affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090).

Q: Which part should be selected for automated assembly?

A: The RN60D1743FRE6 in tape and reel format is designed for automated component placement systems.

Q: Which part should be selected for manual assembly?

A: The RN60D1743FB14 in bulk packaging is suitable for manual assembly processes.

Q: Are both parts currently in production?

A: Yes. Both parts have active product status with current inventory availability.