RN60D15R0FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D15R0FRE6 is a 15 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale, designed for military and aerospace applications. This axial component features flame retardant coating, moisture resistance, and compliance with MIL-R-10509/1 specifications. The part is currently active in production with 1084 units in stock. Substitute parts are identified to address packaging format requirements or inventory availability while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D15R0FRE6

Vishay DaleIn Stock: 1117RN60D15R0FRE6 Datasheet

Current PartRFQ

RN60D15R0FB14

Vishay DaleIn Stock: 919RN60D15R0FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN60D15R0FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 15 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial through-hole
• Physical dimensions: 0.145" Dia × 0.344" L
• Series compliance: MIL-R-10509/1, RN60 base product

The identified substitute differs only in packaging format (Bulk versus Cut Tape), which does not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D15R0FRE6 and RN60D15R0FB14 are active production components from Vishay Dale with identical electrical specifications and military-grade certifications. Selection between these parts should be based on packaging requirements and supply chain logistics:

• RN60D15R0FRE6 (Cut Tape packaging) is suitable for automated assembly processes requiring tape-and-reel format with 1084 units currently available.
• RN60D15R0FB14 (Bulk packaging) accommodates manual assembly or alternative handling procedures with 860 units in stock.

Both parts maintain RoHS non-compliant and REACH Affected status, consistent with military-specification metal film resistor standards. No electrical performance variation exists between these alternatives.

Frequently Asked Questions (FAQ)

Q: Can RN60D15R0FB14 be used as a direct replacement for RN60D15R0FRE6 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Cut Tape). Circuit performance, reliability, and environmental specifications remain unchanged.

Q: What determines compatibility between these substitute parts?

A: Compatibility is determined by matching resistance value (15 Ohms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), and axial package dimensions (0.145" Dia × 0.344" L). Both parts meet these criteria identically.

Q: Does packaging format affect electrical performance?

A: No. Cut Tape and Bulk packaging formats do not affect electrical characteristics, frequency response, or reliability. The difference is purely logistical and relates to component handling and assembly automation compatibility.

Q: Are both parts suitable for military applications?

A: Yes. Both RN60D15R0FRE6 and RN60D15R0FB14 comply with MIL-R-10509/1 specifications and feature military-grade construction including flame retardant coating and moisture resistance.

Q: What is the significance of the RN60 base product number?

A: The RN60 designation identifies the product family within Vishay Dale's military resistor line. Both substitute parts share this base number, confirming they belong to the same qualified product series with identical performance characteristics.