RN60D1542FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1542FRE6 is a 15.4 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1) and features flame retardant coating with moisture resistance suitable for military and aerospace applications. The part maintains active product status with 635 units currently in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical.

Substiute Parts

RN60D1542FRE6

Vishay DaleIn Stock: 743RN60D1542FRE6 Datasheet

Current PartRFQ

RN60D1542FB14

Vishay DaleIn Stock: 1747RN60D1542FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D1542FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 15.4 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package type: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Series compliance: MIL-R-10509/1, RN60

The only permissible variation is packaging format (Tape & Reel versus Bulk), which does not affect electrical performance or mechanical compatibility in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1542FRE6 and RN60D1542FB14 are active products from Vishay Dale with identical electrical specifications and military-grade certifications. Selection between these parts depends on procurement and assembly requirements:

RN60D1542FRE6 (Tape & Reel packaging) is suitable for automated assembly processes requiring continuous component feed from tape reels.

RN60D1542FB14 (Bulk packaging) is suitable for manual assembly, kit builds, or applications where individual component handling is preferred.

Both parts maintain equivalent compliance status: RoHS non-compliant and REACH Affected. No electrical or thermal performance difference exists between the two packaging formats.

Frequently Asked Questions (FAQ)

Q: Can RN60D1542FB14 replace RN60D1542FRE6 in my circuit?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid for any application using the RN60D1542FRE6.

Q: Does packaging format affect component performance?

A: No. Tape & Reel and Bulk packaging formats contain identical components. Packaging affects only handling, storage, and assembly methodology, not electrical characteristics or reliability.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS and REACH status. Both are RoHS non-compliant and REACH Affected.

Q: What is the physical compatibility between these substitutes?

A: Both parts are axial package with identical dimensions (0.145" Dia x 0.344" L / 3.68mm x 8.74mm). They are mechanically interchangeable in PCB layouts and breadboard applications.

Q: Can I use these parts interchangeably in military or aerospace applications?

A: Yes. Both parts comply with MIL-R-10509/1 military specifications and carry identical military-grade certifications through the RN60 series.

Q: What inventory considerations apply to these substitutes?

A: RN60D1542FRE6 (Tape & Reel) has 635 units in stock. RN60D1542FB14 (Bulk) has 1707 units in stock. Bulk packaging offers higher current availability.