Vishay Dale RN60D1332FRE6 Equivalent & Substitute Parts Reference

Part Overview

Manufacturer Part Number RN60D1332FRE6 is a Vishay Dale through hole resistor, categorized as a 13.3 kOhm ±1% 0.25W axial metal film resistor with flame retardant coating. It is designed for military, moisture-resistant, and safety-critical applications and is supplied in Tape & Reel (TR) packaging. The part is active and has specific compliance characteristics such as RoHS non-compliant and REACH-affected status. Alternative models may be required for inventory management, packaging preference, compliance alignment, or supply chain continuity.

Substiute Parts

RN60D1332FRE6

Vishay DaleIn Stock: 1082RN60D1332FRE6 Datasheet

Current PartRFQ

RN60D1332FB14

Vishay DaleIn Stock: 1264RN60D1332FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute selection for RN60D1332FRE6 is based strictly on identical electrical and mechanical parameters. The following fields are exclusively used to qualify substitutes: resistance, tolerance, power rating, composition, features, temperature coefficient, operating temperature range, package/case type, supplier device package, size/dimension, number of terminations, and compliance/certification details. Additional consideration is given to packaging type within inventory or assembly constraints.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1332FRE6 and RN60D1332FB14 have identical electrical, mechanical, and compliance parameters. The only difference is packaging: Tape & Reel (TR) for RN60D1332FRE6 and Bulk for RN60D1332FB14. Both parts are active and RoHS non-compliant, with REACH-affected status. Selection should be determined by packaging requirements and inventory availability, not performance or compliance differences.

Frequently Asked Questions (FAQ)

Q1: Can RN60D1332FB14 substitute for RN60D1332FRE6 in all applications?
A1: RN60D1332FB14 is an equivalent substitute based on identical resistance, tolerance, power rating, composition, features, temperature coefficient, operating temperature, package/case, size/dimension, and compliance status. The only parameter variation is packaging.

Q2: Will the change in packaging (Bulk vs. Tape & Reel) affect electronic assembly?
A2: Packaging impacts handling, automated insertion, and inventory processes. It does not affect electrical performance if the part specifications are identical.

Q3: Is there any difference in compliance or certification between these parts?
A3: Both RN60D1332FRE6 and RN60D1332FB14 are RoHS non-compliant and REACH affected, with equivalent military and safety features.

Q4: Do both resistors share the same mechanical dimensions and termination configuration?
A4: Yes, both have 0.145" diameter x 0.344" length axial package and 2 terminations.

Q5: What considerations should be made when switching between these part numbers?
A5: Only packaging method should be considered. Electrical, mechanical, and compliance parameters remain unchanged.