RN60D1300FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1300FRE6 is a 130 Ohm, 1/4W metal film axial resistor manufactured by Vishay Dale, designed for military and high-reliability applications. This component features flame retardant coating, moisture resistance, and compliance with MIL-R-10509/1 specifications. The part is currently in active production status with 1720 units available in Cut Tape packaging. Substitute parts are identified to address packaging availability, inventory requirements, and procurement flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D1300FRE6

Vishay DaleIn Stock: 1742RN60D1300FRE6 Datasheet

Current PartRFQ

RN60D1300FB14

Vishay DaleIn Stock: 1158RN60D1300FB14 Datasheet

DirectRFQ

RN60D1300FRE6

Vishay DaleIn Stock: 1742RN60D1300FRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60D1300FRE6 are identified based on strict electrical and mechanical parameter equivalence. The substitution logic is determined by the following criteria:

• Identical resistance value: 130 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.25W (1/4W)
• Identical composition: Metal Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 175°C
• Identical package type: Axial Through Hole
• Identical physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Identical series designation: RN60, MIL-R-10509/1
• Identical features: Flame Retardant Coating, Military Grade, Moisture Resistant, Safety Metal Film

The primary difference between the main part and its substitute is packaging format: Cut Tape (CT) versus Bulk. This distinction affects procurement and handling but does not alter electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1300FRE6 and RN60D1300FB14 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and procurement methodology:

• RN60D1300FRE6 (Cut Tape): Suitable for automated assembly processes and applications requiring tape-and-reel format handling.
• RN60D1300FB14 (Bulk): Suitable for manual assembly, kit builds, and applications where bulk packaging is preferred.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. Both are certified to MIL-R-10509/1 military specifications and are suitable for applications requiring military-grade reliability, flame retardant properties, and moisture resistance across the -65°C to 175°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can RN60D1300FB14 be used as a direct replacement for RN60D1300FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Cut Tape). Electrical performance, tolerance, power rating, temperature characteristics, and physical dimensions are identical.

Q: What is the difference between Cut Tape and Bulk packaging?

A: Cut Tape (CT) packaging provides components on continuous tape suitable for automated pick-and-place assembly equipment. Bulk packaging provides loose components suitable for manual assembly or kit applications. Both formats contain the same component with identical specifications.

Q: Are there any compliance differences between the substitute parts?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected. Both comply with MIL-R-10509/1 military specifications.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes, provided the assembly process accommodates the packaging format. Cut Tape parts require automated tape-handling equipment, while Bulk parts are suitable for manual placement or alternative assembly methods. Once soldered, the installed components are functionally identical.

Q: What are the key parameters that determine substitutability?

A: Resistance value (130 Ohms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), package type (Axial), and physical dimensions (0.145" Dia × 0.344" L) must all match exactly for substitution.