RN60D1250FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1250FRE6 is a 125 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale, designed for military and aerospace applications. This axial resistor features flame retardant coating, moisture resistance, and meets MIL-R-10509/1 specifications. The part is currently active in production with 1011 pieces available in tape and reel packaging. Substitute parts are identified when packaging format changes or inventory constraints require alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D1250FRE6

Vishay DaleIn Stock: 1093RN60D1250FRE6 Datasheet

Current PartRFQ

RN60D1250FB14

Vishay DaleIn Stock: 6226RN60D1250FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D1250FB14 qualifies as a direct substitute for the RN60D1250FRE6 based on the following criteria:

• Identical resistance value: 125 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.25W (1/4W)
• Identical composition: Metal Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 175°C
• Identical package type: Axial
• Identical physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Identical series specification: Military, MIL-R-10509/1, RN60
• Identical features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The only difference between these parts is the packaging format: RN60D1250FRE6 is supplied in Tape & Reel (TR), while RN60D1250FB14 is supplied in Bulk packaging. Both parts maintain identical electrical performance and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1250FRE6 and RN60D1250FB14 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability:

• RN60D1250FRE6 is appropriate for automated assembly processes requiring tape and reel packaging format
• RN60D1250FB14 is appropriate for manual assembly or applications where bulk packaging is acceptable
• Both parts maintain RoHS non-compliant status and REACH Affected compliance classification
• Both parts carry ECCN EAR99 and HTSUS 8533.21.0090 classifications

Frequently Asked Questions (FAQ)

Q: Can RN60D1250FB14 be used as a direct replacement for RN60D1250FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Bulk). Substitution is valid provided the assembly process can accommodate bulk packaging.

Q: What determines compatibility between these resistor models?

A: Compatibility is determined by resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, package type, and physical dimensions. All these parameters are identical between RN60D1250FRE6 and RN60D1250FB14.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090).

Q: Which part should be selected for high-volume automated assembly?

A: RN60D1250FRE6 in Tape & Reel packaging is designed for automated pick-and-place assembly processes. RN60D1250FB14 in Bulk packaging is suitable for manual assembly or lower-volume applications.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.145" diameter × 0.344" length (3.68mm × 8.74mm) and are fully interchangeable in PCB layouts and mechanical assemblies.