RN60D1211FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1211FRE6 is a 1.21 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series per MIL-R-10509/1 specification, this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part maintains active product status with 687 units currently in stock. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D1211FRE6

Vishay DaleIn Stock: 762RN60D1211FRE6 Datasheet

Current PartRFQ

RN60D1211FB14

Vishay DaleIn Stock: 1451RN60D1211FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D1211FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 1.21 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Package configuration: Axial
• Physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Series compliance: Military, MIL-R-10509/1, RN60
• Feature set: Flame Retardant Coating, Military, Moisture Resistant, Safety

The identified substitute part RN60D1211FB14 maintains complete electrical and mechanical equivalence. The primary distinction is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts share identical base product number RN60 and comply with the same military specification.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1211FRE6 and RN60D1211FB14 are active products manufactured by Vishay Dale with identical electrical performance and mechanical compatibility. Selection between these parts is determined by packaging requirements and supply chain considerations rather than technical performance.

The RN60D1211FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments. The RN60D1211FB14 in Bulk packaging accommodates manual assembly, repair operations, and lower-volume applications.

Both parts maintain RoHS non-compliant and REACH Affected status. Compliance requirements for specific applications must be evaluated independently of substitution eligibility.

Frequently Asked Questions (FAQ)

Q: Are RN60D1211FRE6 and RN60D1211FB14 electrically identical?

A: Yes. Both parts have identical resistance value (1.21 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C). Electrical performance is equivalent.

Q: What is the difference between these two parts?

A: The primary difference is packaging format. RN60D1211FRE6 is supplied in Tape & Reel (TR) configuration for automated assembly. RN60D1211FB14 is supplied in Bulk packaging for manual assembly and repair applications. Physical component dimensions and specifications are identical.

Q: Can RN60D1211FB14 be used as a direct replacement for RN60D1211FRE6?

A: Yes, for applications where packaging format does not constrain the assembly process. The component itself is mechanically and electrically equivalent. Bulk packaging may require manual handling and placement rather than automated tape-fed assembly.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status. Regulatory compliance classification is equivalent.

Q: Which part should be selected for high-volume automated assembly?

A: RN60D1211FRE6 in Tape & Reel format is optimized for automated pick-and-place assembly processes.

Q: Which part should be selected for repair or low-volume applications?

A: RN60D1211FB14 in Bulk packaging is suitable for manual assembly, repair operations, and applications where tape-fed components are not required.