RN60D1103FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1103FRE6 is a 110 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series per MIL-R-10509/1 specification, this component features flame retardant coating and moisture-resistant construction suitable for military and high-reliability applications. The part is currently active in production with 972 units in stock. Substitute parts may be required due to packaging availability, supply chain considerations, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RN60D1103FRE6

Vishay DaleIn Stock: 999RN60D1103FRE6 Datasheet

Current PartRFQ

RN60D1103FB14

Vishay DaleIn Stock: 1231RN60D1103FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D1103FRE6 is determined by strict equivalence across the following parameters:

• Resistance value: 110 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package: Axial
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C
• Series: RN60 (MIL-R-10509/1)
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Features: Flame Retardant Coating, Moisture Resistant, Safety

The primary difference between the main part and its substitute is packaging format: the RN60D1103FRE6 is supplied in Tape & Reel (TR) configuration, while the substitute RN60D1103FB14 is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale under identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D1103FRE6 and RN60D1103FB14 are active production components manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements:

• RN60D1103FRE6: Select when Tape & Reel packaging is required for automated assembly or high-volume production environments.
• RN60D1103FB14: Select when Bulk packaging is acceptable for manual assembly, prototyping, or applications where packaging format does not impact assembly methodology.

Both parts comply with MIL-R-10509/1 military specification and are RoHS non-compliant with REACH Affected status. ECCN classification is EAR99 for both variants.

Frequently Asked Questions (FAQ)

Q: Can RN60D1103FB14 be used as a direct replacement for RN60D1103FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid provided the assembly process accommodates the packaging change.

Q: What is the significance of the packaging difference between these parts?

A: Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly systems. Bulk packaging is suitable for manual assembly or lower-volume applications. The component itself is identical in both formats.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and ECCN classification (EAR99). Both comply with MIL-R-10509/1 specification.

Q: What are the key parameters that define substitution eligibility?

A: Resistance value (110 kOhms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), and physical dimensions (0.145" Dia x 0.344" L) must remain constant for valid substitution.

Q: Can these parts be used interchangeably in military applications?

A: Yes. Both parts are manufactured under the RN60 military series per MIL-R-10509/1 specification and are suitable for military-grade applications. Packaging format does not affect military qualification.