RN60D1102FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1102FRE6 is a 11 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series per MIL-R-10509/1 specification, this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 932 units in stock. Substitute parts may be required due to packaging format availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RN60D1102FRE6

Vishay DaleIn Stock: 1040RN60D1102FRE6 Datasheet

Current PartRFQ

RN60D1102FB14

Vishay DaleIn Stock: 2109RN60D1102FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D1102FRE6 is determined by strict equivalence across the following parameters:

• Resistance value: 11 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Package configuration: Axial through-hole (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Series: RN60 military-grade (exact match required)

The primary variable among qualified substitutes is packaging format (Tape & Reel versus Bulk), which does not affect electrical or mechanical performance. All substitute parts must maintain identical electrical specifications and physical form factor to ensure direct interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D1102FRE6 and RN60D1102FB14 are active production components manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement requirements and supply chain considerations:

The RN60D1102FRE6 is supplied in Tape & Reel format, suitable for automated assembly processes and high-volume production environments. The RN60D1102FB14 is supplied in Bulk packaging, appropriate for manual assembly, prototyping, or applications where individual component handling is required.

Both parts maintain equivalent compliance status: RoHS non-compliant and REACH Affected with EAR99 export classification. No electrical or thermal performance differential exists between these parts. Direct substitution is permissible based on packaging format availability and assembly methodology requirements.

Frequently Asked Questions (FAQ)

Q: Can RN60D1102FB14 be used as a direct replacement for RN60D1102FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Bulk. Direct substitution is valid for any application where the RN60D1102FRE6 is specified.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging is designed for automated pick-and-place assembly equipment and is standard for high-volume manufacturing. Bulk packaging consists of loose components suitable for manual assembly or lower-volume applications. Electrical and mechanical performance is identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and ECCN classification (EAR99). Compliance requirements and export restrictions are equivalent.

Q: Can these parts be used interchangeably in military applications?

A: Yes. Both parts are manufactured to MIL-R-10509/1 specification within the RN60 military-grade series. Electrical specifications, temperature performance, and reliability features are identical.

Q: What determines substitution eligibility for the RN60D1102FRE6?

A: Substitutes must match all electrical parameters (11 kOhms ±1%, 0.25W, ±100ppm/°C, -65°C to 175°C operating range), composition (metal film), package type (axial), physical dimensions (0.145" Dia × 0.344" L), and series classification (RN60 military-grade). Packaging format is the only variable parameter.