RN60D1101FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1101FRE6 is a 1.1 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 738 units in stock. Substitute parts may be required due to packaging format availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D1101FRE6

Vishay DaleIn Stock: 779RN60D1101FRE6 Datasheet

Current PartRFQ

RN60D1101FB14

Vishay DaleIn Stock: 2200RN60D1101FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RN60D1101FRE6 is based on electrical and mechanical parameter equivalence within the RN60 military series. The substitute part RN60D1101FB14 maintains identical electrical characteristics: 1.1 kOhms resistance, ±1% tolerance, 0.25W power rating, metal film composition, and axial package configuration. Both parts operate across the same temperature range (-65°C to 175°C) with identical temperature coefficient (±100ppm/°C) and physical dimensions (0.145" Dia × 0.344" L).

The primary distinction between these parts is packaging format: RN60D1101FRE6 is supplied in Tape & Reel (TR) format, while RN60D1101FB14 is supplied in Bulk format. Both share the same base product number (RN60), military series designation, and compliance status. Substitution is valid when packaging format does not impose constraints on assembly or procurement workflows.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1101FRE6 and RN60D1101FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging format requirements and procurement constraints.

RN60D1101FRE6 in Tape & Reel format is suitable for automated assembly processes requiring continuous component feed. RN60D1101FB14 in Bulk format is suitable for manual assembly, kit builds, or applications where tape packaging is not required. Both parts maintain RoHS non-compliant status, REACH affected designation, and EAR99 ECCN classification. Inventory availability differs, with RN60D1101FB14 offering higher stock levels (2100 units versus 738 units).

Frequently Asked Questions (FAQ)

Q: Can RN60D1101FB14 replace RN60D1101FRE6 in automated assembly?

A: RN60D1101FB14 is supplied in Bulk packaging, which is not compatible with automated tape-fed component placement equipment. RN60D1101FRE6 in Tape & Reel format is required for automated assembly processes.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Both parts have identical resistance (1.1 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 175°C).

Q: Do these parts have the same physical dimensions?

A: Yes. Both parts are axial package configuration with identical dimensions of 0.145" Dia × 0.344" L (3.68mm × 8.74mm).

Q: What is the difference between these substitute parts?

A: The primary difference is packaging format. RN60D1101FRE6 is supplied in Tape & Reel (TR) format for automated assembly, while RN60D1101FB14 is supplied in Bulk format for manual assembly or kit applications.

Q: Are both parts military-grade components?

A: Yes. Both parts are manufactured to MIL-R-10509/1 military specification within the RN60 series and include flame retardant coating, moisture resistance, and safety features.

Q: What compliance status applies to both parts?

A: Both parts are RoHS non-compliant, REACH affected, and classified under ECCN EAR99 with HTSUS code 8533.21.0090.