RN60D1100FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1100FRE6 is a 110 Ohms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series per MIL-R-10509/1 specification, this component features flame retardant coating and moisture-resistant construction suitable for military and high-reliability applications. The part is currently active in production with 1003 units in stock. Substitute parts may be required due to packaging availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

RN60D1100FRE6

Vishay DaleIn Stock: 1031RN60D1100FRE6 Datasheet

Current PartRFQ

RN60D1100FB14

Vishay DaleIn Stock: 1120RN60D1100FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60D1100FB14 qualifies as a direct electrical and mechanical substitute for the RN60D1100FRE6 based on the following criteria:

Matching Parameters:

• Identical resistance value: 110 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.25W (1/4W)
• Identical composition: Metal Film
• Identical package type: Axial
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -65°C to 175°C
• Identical series designation: RN60 (Military, MIL-R-10509/1)
• Identical physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Identical number of terminations: 2

Difference: The sole distinction between these parts is packaging format: RN60D1100FRE6 is supplied in Tape & Reel (TR) configuration, while RN60D1100FB14 is supplied in Bulk packaging. Both parts maintain identical electrical performance, mechanical compatibility, and environmental specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1100FRE6 and RN60D1100FB14 are active production components from Vishay Dale with identical electrical specifications and military-grade certifications. Selection between these parts should be based on procurement and assembly requirements:

RN60D1100FRE6 (Tape & Reel): Suitable for automated assembly processes requiring tape-and-reel packaging format. Recommended for high-volume production environments with pick-and-place equipment.

RN60D1100FB14 (Bulk): Suitable for manual assembly, low-volume production, or applications where tape-and-reel format is not required. Appropriate for prototype development and field service applications.

Both parts comply with MIL-R-10509/1 military specifications and maintain identical performance across all electrical and environmental parameters. Neither part is RoHS compliant; both are REACH Affected and classified under ECCN EAR99.

Frequently Asked Questions (FAQ)

Q: Can RN60D1100FB14 be used as a direct replacement for RN60D1100FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Direct substitution is valid for any application where the RN60D1100FRE6 is specified, provided assembly equipment compatibility with bulk packaging is confirmed.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components wound on continuous tape within a reel, optimized for automated pick-and-place assembly. Bulk packaging supplies loose components in standard quantities, suitable for manual assembly or applications not requiring automated handling.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts measure 0.145" diameter × 0.344" length (3.68mm × 8.74mm) and are housed in identical axial package configuration. PCB footprint and mounting requirements are identical.

Q: Do both parts meet military specifications?

A: Yes. Both RN60D1100FRE6 and RN60D1100FB14 are manufactured to MIL-R-10509/1 specification and are part of the military-grade RN60 series. Both feature flame retardant coating and moisture-resistant construction.

Q: What is the temperature operating range for these resistors?

A: Both parts operate across -65°C to 175°C. Temperature coefficient is ±100ppm/°C for both variants.

Q: Are these parts RoHS compliant?

A: No. Both RN60D1100FRE6 and RN60D1100FB14 are RoHS non-compliant. Both are REACH Affected components.