RN60D1071FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1071FRE6 is a 1.07 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 682 units in stock. Substitute parts may be required due to packaging availability, inventory constraints, or specific procurement requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60D1071FRE6

Vishay DaleIn Stock: 737RN60D1071FRE6 Datasheet

Current PartRFQ

RN60D1071FB14

Vishay DaleIn Stock: 1083RN60D1071FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60D1071FRE6 is determined by strict equivalence across the following parameters:

• Resistance value: 1.07 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package: Axial through-hole (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Series: RN60 military-grade (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)

The primary variable among qualified substitutes is packaging format (Tape & Reel versus Bulk), which does not affect electrical or mechanical performance. All substitute parts must maintain identical electrical characteristics and physical form factor to ensure direct interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60D1071FRE6 and RN60D1071FB14 are active production components manufactured by Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on procurement requirements:

The RN60D1071FRE6 in Tape & Reel packaging is suitable for automated assembly processes and high-volume production environments. The RN60D1071FB14 in Bulk packaging is appropriate for manual assembly, repair operations, or applications where individual component handling is required.

Both parts maintain RoHS non-compliant and REACH Affected status, reflecting their military-grade classification. Compliance requirements for the end application must be evaluated independently of part selection.

Frequently Asked Questions (FAQ)

Q: Can RN60D1071FB14 be used as a direct replacement for RN60D1071FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Direct substitution is valid for circuit applications.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging is used for automated pick-and-place assembly equipment. Bulk packaging contains loose components suitable for manual assembly or hand-soldering applications. Electrical and mechanical performance are identical.

Q: Are there any compliance differences between these substitute parts?

A: No. Both parts share identical RoHS non-compliant and REACH Affected status. Compliance evaluation must be performed at the system level based on application requirements.

Q: Can these resistors be used in applications requiring RoHS compliance?

A: No. Both the RN60D1071FRE6 and RN60D1071FB14 are RoHS non-compliant. Applications requiring RoHS compliance require alternative component selection.

Q: What is the temperature coefficient significance for this resistor?

A: The ±100ppm/°C temperature coefficient indicates the resistor's resistance value will change by approximately 0.01% per degree Celsius within the -65°C to 175°C operating range. Both substitute parts have identical temperature stability.

Q: Are inventory levels a factor in part selection?

A: Inventory availability may influence procurement decisions. RN60D1071FRE6 has 682 units in stock, while RN60D1071FB14 has 1056 units in stock. Both are currently available from inventory.