RN60D1022FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1022FRE6 is a 10.2 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 1135 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across different supply channels and inventory conditions.

Substiute Parts

RN60D1022FRE6

Vishay DaleIn Stock: 1164RN60D1022FRE6 Datasheet

Current PartRFQ

RN60D1022FB14

Vishay DaleIn Stock: 1219RN60D1022FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RN60D1022FRE6 with RN60D1022FB14 is valid based on the following criteria:

Identical Electrical Parameters:

• Resistance value: 10.2 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C

Identical Mechanical Parameters:

• Composition: Metal Film
• Package type: Axial
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Number of terminations: 2

Identical Series & Features:

• Base product number: RN60
• Military series: MIL-R-10509/1
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety

Difference:

• Packaging format: RN60D1022FRE6 supplied in Tape & Reel (TR); RN60D1022FB14 supplied in Bulk

Both parts maintain identical electrical performance, thermal characteristics, and physical form factor. The substitution is valid for applications where packaging format does not impose supply chain or assembly constraints.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1022FRE6 and RN60D1022FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging and supply requirements:

RN60D1022FRE6 (Tape & Reel): Suitable for automated assembly processes requiring reel-fed component handling. Current inventory: 1135 units.

RN60D1022FB14 (Bulk): Suitable for manual assembly, kit builds, or applications where reel packaging is not required. Current inventory: 1170 units.

Both parts maintain RoHS non-compliant and REACH Affected status. No compliance advantage exists between the two variants. Selection should prioritize assembly process compatibility and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can RN60D1022FB14 be used as a direct replacement for RN60D1022FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk vs. Tape & Reel). Direct substitution is valid provided the receiving assembly process can accommodate bulk packaging.

Q: What is the primary difference between these two part numbers?

A: The packaging format. RN60D1022FRE6 is supplied in Tape & Reel configuration for automated pick-and-place assembly. RN60D1022FB14 is supplied in Bulk for manual handling or alternative assembly methods. All electrical and physical specifications are identical.

Q: Are there any performance differences between the two parts?

A: No. Both parts share identical resistance value (10.2 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), and physical dimensions (0.145" Dia x 0.344" L).

Q: Do both parts meet the same military and safety standards?

A: Yes. Both are manufactured to MIL-R-10509/1 specification and feature identical flame retardant coating, military-grade construction, moisture resistance, and safety ratings.

Q: Which part should I select for my application?

A: Selection depends on assembly process requirements. Use RN60D1022FRE6 for automated assembly lines requiring tape-and-reel feeding. Use RN60D1022FB14 for manual assembly, prototyping, or applications where bulk packaging is acceptable.

Q: Are there any compliance or regulatory differences?

A: No. Both parts carry identical RoHS non-compliant and REACH Affected status. No regulatory advantage exists between the two variants.