RN60D1002FBSL Equivalent & Substitute Parts

Part Overview

The RN60D1002FBSL is a 10 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale, this component is part of the military-grade RN60 series compliant with MIL-R-10509/1 specifications. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. With active product status and 908 units in stock, substitute parts are identified to address packaging preferences, tolerance requirements, and temperature coefficient specifications while maintaining core electrical and mechanical compatibility.

Substiute Parts

RN60D1002FBSL

Vishay DaleIn Stock: 983RN60D1002FBSL Datasheet

Current PartRFQ

RN60D1002FRE6

Vishay DaleIn Stock: 7717RN60D1002FRE6 Datasheet

DirectRFQ

RN60C1002FB14

Vishay DaleIn Stock: 3796RN60C1002FB14 Datasheet

UpgradeRFQ

RN60C1002FRE6

Vishay DaleIn Stock: 5334RN60C1002FRE6 Datasheet

UpgradeRFQ

RN60E1002BRE6

Vishay DaleIn Stock: 2826RN60E1002BRE6 Datasheet

UpgradeRFQ

RN60D1002FB14

Vishay DaleIn Stock: 1343RN60D1002FB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60D1002FBSL are classified based on the following substitution criteria:

Direct Manufacturer Equivalent (Packaging Variant):

• RN60D1002FRE6: Identical electrical specifications and physical dimensions; differs only in packaging format (Cut Tape vs. Bulk)

Upgrade Parts (Enhanced Tolerance and Temperature Coefficient):

• RN60C1002FB14: Tighter temperature coefficient (±50ppm/°C vs. ±100ppm/°C); Bulk packaging
• RN60C1002FRE6: Tighter temperature coefficient (±50ppm/°C vs. ±100ppm/°C); Cut Tape packaging
• RN60E1002BRE6: Superior tolerance (±0.1% vs. ±1%) and tighter temperature coefficient (±25ppm/°C); Cut Tape packaging

Parametric Equivalent (Packaging Variant):

• RN60D1002FB14: Identical electrical specifications and physical dimensions; differs only in packaging format (Bulk)

All substitute parts maintain the same 10 kOhms resistance value, 0.25W power rating, axial package configuration, physical dimensions, operating temperature range, and military-grade construction. Substitution compatibility is determined by matching resistance, tolerance, power rating, package type, and physical dimensions.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance): Select RN60D1002FRE6 or RN60D1002FB14 when packaging format differs from the original specification. Both parts maintain identical electrical characteristics and are suitable for direct substitution in applications where the RN60D1002FBSL was originally specified.

For Enhanced Stability Applications: RN60C1002FB14 and RN60C1002FRE6 provide improved temperature stability with ±50ppm/°C coefficient, suitable for circuits requiring tighter frequency or gain stability over temperature variations. These parts are compatible substitutes for applications where enhanced thermal performance is beneficial.

For Precision Circuit Applications: RN60E1002BRE6 offers superior tolerance (±0.1%) and the tightest temperature coefficient (±25ppm/°C) among available substitutes. This part is suitable for precision measurement, instrumentation, and reference circuits where tolerance and temperature stability are critical parameters.

All substitute parts maintain active product status, military-grade construction, and compliance with MIL-R-10509/1 specifications. Selection should be based on packaging requirements, tolerance specifications, and temperature coefficient performance needed for the target application.

Frequently Asked Questions (FAQ)

Q: Can RN60D1002FRE6 replace RN60D1002FBSL in production assemblies? A: Yes. RN60D1002FRE6 is a direct electrical equivalent with identical resistance, tolerance, power rating, and temperature coefficient. The only difference is packaging format (Cut Tape vs. Bulk). Compatibility depends on assembly equipment capability to handle the specified packaging format.

Q: What is the difference between the RN60C and RN60E series substitutes? A: RN60C series parts feature ±50ppm/°C temperature coefficient compared to the original ±100ppm/°C. RN60E series parts offer superior tolerance (±0.1% vs. ±1%) and the tightest temperature coefficient (±25ppm/°C). Both are upgrades in terms of stability and precision.

Q: Are all substitute parts physically interchangeable? A: Yes. All substitute parts maintain identical physical dimensions (0.145" Dia x 0.344" L) and axial package configuration. Physical interchangeability is confirmed across all listed substitutes.

Q: Which substitute should be selected for high-temperature applications? A: All parts, including the original RN60D1002FBSL, operate across the same temperature range (-65°C to 175°C). For applications requiring superior performance stability across this range, RN60E1002BRE6 with ±25ppm/°C temperature coefficient is the optimal choice.

Q: Does packaging format affect electrical performance? A: No. Packaging format (Bulk vs. Cut Tape) affects only handling, storage, and assembly processes. Electrical performance remains identical between parts with the same part number prefix and suffix designation.

Q: Are substitute parts RoHS compliant? A: All listed parts, including the original RN60D1002FBSL, are RoHS non-compliant. This is consistent with military-grade specifications and does not affect substitution compatibility.