RN60C8250FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C8250FRE6 is a 825 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety characteristics suitable for demanding applications. The part is currently active in production with 786 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format or inventory availability requires alternatives.

Substiute Parts

RN60C8250FRE6

Vishay DaleIn Stock: 831RN60C8250FRE6 Datasheet

Current PartRFQ

RN60C8250FB14

Vishay DaleIn Stock: 925RN60C8250FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C8250FRE6 is determined by the following critical parameters:

• Resistance value: 825 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W/1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Package type: Axial (exact match required)
• Physical dimensions: 0.145" Dia x 0.344" L (exact match required)
• Series compliance: Military, MIL-R-10509/1, RN60 (exact match required)

The identified substitute part RN60C8250FB14 meets all electrical and mechanical parameters. The primary difference is packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is supplied in Bulk format. Both parts are manufactured by Vishay Dale and share identical electrical specifications and military-grade characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C8250FRE6 and RN60C8250FB14 are active production parts with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and assembly process compatibility:

• RN60C8250FRE6 (Tape & Reel format) is suitable for automated pick-and-place assembly operations
• RN60C8250FB14 (Bulk format) is suitable for manual assembly or applications where tape-and-reel packaging is not required

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. No functional or performance differences exist between these parts when used in equivalent circuit applications.

Frequently Asked Questions (FAQ)

Q: Can RN60C8250FB14 be used as a direct replacement for RN60C8250FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk vs. Tape & Reel). Functional performance in the circuit is identical.

Q: What is the primary difference between these substitute parts?

A: The packaging format differs. RN60C8250FRE6 is supplied in Tape & Reel format for automated assembly, while RN60C8250FB14 is supplied in Bulk format. All electrical specifications, physical dimensions, and military-grade characteristics are identical.

Q: Are there any compliance differences between the main part and substitute?

A: No. Both parts share identical RoHS and REACH compliance status. Both are RoHS non-compliant and REACH Affected.

Q: What parameters must match exactly for substitution?

A: Resistance (825 Ohms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), package type (Axial), physical dimensions (0.145" Dia x 0.344" L), and series designation (Military, MIL-R-10509/1, RN60) must all match exactly.

Q: Can these parts be used interchangeably in military applications?

A: Yes. Both parts are manufactured to the same military specifications (MIL-R-10509/1) and carry identical military-grade features including flame retardant coating, moisture resistance, and safety characteristics.