RN60C7502FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C7502FRE6 is a 75 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part maintains active product status with 1052 units in current inventory. Substitute parts are identified when packaging format changes or inventory constraints necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60C7502FRE6

Vishay DaleIn Stock: 1117RN60C7502FRE6 Datasheet

Current PartRFQ

RN60C7502FB14

Vishay DaleIn Stock: 897RN60C7502FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C7502FRE6 is determined by strict equivalence across the following critical parameters:

• Resistance value: 75 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Package type: Axial
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Series classification: Military, MIL-R-10509/1, RN60
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Termination count: 2

The identified substitute part differs only in packaging format (Bulk versus Tape & Reel), which does not affect electrical performance or mechanical compatibility in circuit applications. Both parts share identical base product number (RN60) and manufacturing specifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN60C7502FRE6 and RN60C7502FB14 are active products from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and supply chain logistics rather than technical performance criteria.

The RN60C7502FRE6 in Tape & Reel format is suitable for automated assembly processes and high-volume production environments. The RN60C7502FB14 in Bulk packaging is appropriate for manual assembly, prototyping, or applications where reel-based delivery is not required.

Both parts maintain equivalent compliance status: RoHS non-compliant and REACH Affected. Military-grade construction (MIL-R-10509/1) and identical operating specifications ensure functional interchangeability in circuit design applications.

Frequently Asked Questions (FAQ)

Q: Can RN60C7502FB14 replace RN60C7502FRE6 in production assembly?

A: Yes. Both parts are electrically and mechanically identical. The substitute differs only in packaging format (Bulk versus Tape & Reel). Compatibility depends on assembly equipment capability to handle bulk components versus reel-fed components.

Q: Are there differences in reliability or performance between these parts?

A: No. Both parts are manufactured to identical specifications within the RN60 military series, with matching resistance value, tolerance, power rating, temperature coefficient, and operating temperature range.

Q: What is the significance of the packaging difference?

A: Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly systems. Bulk packaging is suitable for manual assembly or lower-volume applications. The electrical and mechanical performance of the resistor itself is unaffected by packaging format.

Q: Are both parts currently available?

A: Yes. RN60C7502FRE6 has 1052 units in inventory. RN60C7502FB14 has 806 units in inventory. Both maintain active product status.

Q: Do compliance certifications differ between these parts?

A: No. Both parts share identical RoHS and REACH status (RoHS non-compliant, REACH Affected). Military-grade specifications and certifications are equivalent.