RN60C7502FBSL Equivalent & Substitute Parts

Part Overview

The RN60C7502FBSL is a 75 kOhm ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is part of Vishay Dale's military-grade RN60 series, designed for applications requiring flame retardant coating, moisture resistance, and safety compliance. The part is currently active in production with 690 pieces available in new original stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for procurement flexibility, inventory management, or supply chain continuity.

Substiute Parts

RN60C7502FBSL

Vishay DaleIn Stock: 759RN60C7502FBSL Datasheet

Current PartRFQ

RN60C7502FB14

Vishay DaleIn Stock: 897RN60C7502FB14 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C7502FBSL is determined by strict equivalence across the following parameters:

• Resistance value: 75 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Package configuration: Axial through-hole (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Series compliance: Military, MIL-R-10509/1, RN60 (exact match required)
• Feature set: Flame Retardant Coating, Military, Moisture Resistant, Safety (exact match required)

Only parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both RN60C7502FBSL and RN60C7502FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: RN60C7502FB14 has 806 pieces in stock versus 690 pieces for RN60C7502FBSL
• Supply chain requirements: Both parts carry identical RoHS non-compliant and REACH Affected designations
• Regulatory compliance: Both parts meet MIL-R-10509/1 military specifications and carry identical feature sets
• Application continuity: Direct substitution is supported across all electrical parameters, temperature performance, and physical form factors

No additional testing or qualification is required when substituting between these parts, as all critical parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can RN60C7502FB14 be used as a direct replacement for RN60C7502FBSL?

A: Yes. Both parts are parametric equivalents with identical resistance (75 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±50ppm/°C), operating range (-65°C to 175°C), and physical dimensions (0.145" Dia × 0.344" L). They share the same military series classification (MIL-R-10509/1, RN60) and feature set.

Q: Are there any differences in compliance or certifications between these parts?

A: No. Both parts carry identical RoHS non-compliant and REACH Affected designations. Both are classified as military-grade components with flame retardant coating, moisture resistance, and safety features.

Q: What determines if a part can substitute for the RN60C7502FBSL?

A: Substitution requires exact equivalence across all electrical parameters (resistance, tolerance, power rating, temperature coefficient), mechanical specifications (package type, physical dimensions), composition (metal film), operating temperature range (-65°C to 175°C), and series compliance (MIL-R-10509/1, RN60).

Q: Can parts with different resistance values or tolerances be used as substitutes?

A: No. The resistance value (75 kOhms) and tolerance (±1%) are fixed requirements. Any deviation disqualifies a part from substitution eligibility.

Q: Are there packaging differences between RN60C7502FBSL and RN60C7502FB14?

A: No. Both parts use identical axial through-hole packaging with the same physical dimensions (0.145" Dia × 0.344" L / 3.68mm × 8.74mm) and two terminations.