RN60C5000FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C5000FRE6 is a 500 Ohm, 1/4W through-hole axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This metal film resistor features flame retardant coating, moisture resistance, and safety-rated construction with ±1% tolerance. The part is currently active in production with 830 pieces available in tape and reel packaging. Substitute parts are identified to address packaging format preferences, tolerance requirements, or inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60C5000FRE6

Vishay DaleIn Stock: 906RN60C5000FRE6 Datasheet

Current PartRFQ

RN60C5000BB14

Vishay DaleIn Stock: 3511RN60C5000BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60C5000BB14 qualifies as a direct substitute based on the following critical parameters:

• Resistance Value: Both parts are 500 Ohms
• Power Rating: Both rated at 0.25W (1/4W)
• Composition: Both are metal film construction
• Package Type: Both use axial through-hole configuration
• Physical Dimensions: Identical at 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Temperature Coefficient: Both ±50ppm/°C
• Operating Temperature Range: Both -65°C to 175°C
• Series Compliance: Both conform to MIL-R-10509/1 military specification
• Features: Both include flame retardant coating, military rating, moisture resistance, and safety construction

The primary difference is packaging format (tape and reel versus bulk) and tolerance specification (±1% versus ±0.1%). The tighter tolerance of the substitute part does not restrict its use in applications requiring ±1% tolerance.

Parameter Comparison

Engineering Selection Recommendations

Both RN60C5000FRE6 and RN60C5000BB14 are active production parts from Vishay Dale with identical military specification compliance (MIL-R-10509/1) and regulatory status. Selection between these parts should be based on:

Packaging Requirements: The RN60C5000FRE6 is supplied in tape and reel format, suitable for automated assembly processes. The RN60C5000BB14 is supplied in bulk format, appropriate for manual assembly or alternative handling methods.

Tolerance Specification: The RN60C5000BB14 offers ±0.1% tolerance compared to the ±1% tolerance of the RN60C5000FRE6. Applications requiring ±1% tolerance can use either part without restriction. Applications requiring tighter tolerance control benefit from the RN60C5000BB14.

Inventory Availability: The RN60C5000BB14 has higher inventory availability (3425 pieces) compared to the RN60C5000FRE6 (830 pieces).

Both parts maintain identical electrical performance, physical dimensions, temperature characteristics, and military-grade construction features.

Frequently Asked Questions (FAQ)

Q: Can RN60C5000BB14 replace RN60C5000FRE6 in existing designs?

A: Yes. Both parts are electrically and mechanically identical with the same resistance value, power rating, tolerance capability, temperature range, and physical dimensions. The substitute part has tighter tolerance (±0.1% versus ±1%), which does not restrict compatibility. The primary difference is packaging format.

Q: What is the significance of the packaging difference between tape and reel versus bulk?

A: Tape and reel packaging (FRE6) is optimized for automated pick-and-place assembly equipment. Bulk packaging (BB14) is used for manual assembly, hand-soldering, or alternative assembly processes. The electrical and mechanical specifications are identical.

Q: Does the ±0.1% tolerance of RN60C5000BB14 affect compatibility with circuits designed for ±1% tolerance?

A: No. Tighter tolerance is a superset of looser tolerance requirements. A ±0.1% part meets all specifications of a ±1% application. The substitute part provides improved precision without compatibility issues.

Q: Are both parts compliant with military specifications?

A: Yes. Both RN60C5000FRE6 and RN60C5000BB14 conform to MIL-R-10509/1 military specification and are rated for military applications with identical flame retardant coating, moisture resistance, and safety construction.

Q: What are the regulatory compliance considerations?

A: Both parts share identical regulatory status: RoHS non-compliant and REACH Affected. No compliance advantage exists between the two parts.