RN60C3920FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C3920FRE6 is a 392 Ohm, 1/4W metal film through-hole resistor manufactured by Vishay Dale. This component features military-grade specifications with flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/1. The part is supplied in Tape & Reel packaging and maintains active product status. Substitute parts are identified to address packaging availability, inventory requirements, or supply chain alternatives while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60C3920FRE6

Vishay DaleIn Stock: 1162RN60C3920FRE6 Datasheet

Current PartRFQ

RN60C3920FB14

Vishay DaleIn Stock: 1244RN60C3920FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RN60C3920FB14 qualifies as a direct substitute for the RN60C3920FRE6 based on the following criteria:

• Identical resistance value: 392 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.25W (1/4W)
• Identical composition: Metal Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -65°C to 175°C
• Identical package type: Axial
• Identical physical dimensions: 0.145" Dia × 0.344" L (3.68mm × 8.74mm)
• Identical series designation: Military, MIL-R-10509/1, RN60
• Identical features: Flame Retardant Coating, Military, Moisture Resistant, Safety

The only difference between these parts is the packaging format: the main part is supplied in Tape & Reel (TR), while the substitute is supplied in Bulk packaging. Both parts share the same base product number (RN60) and maintain identical electrical and mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C3920FRE6 and RN60C3920FB14 maintain active product status and identical compliance designations (RoHS non-compliant, REACH Affected). Selection between these parts should be based on packaging requirements and supply chain availability. The Tape & Reel format (RN60C3920FRE6) is suitable for automated assembly processes, while the Bulk format (RN60C3920FB14) accommodates manual assembly or alternative handling procedures. Both parts satisfy military-grade specifications and are suitable for applications requiring MIL-R-10509/1 compliance.

Frequently Asked Questions (FAQ)

Q: Can RN60C3920FB14 be used as a direct replacement for RN60C3920FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid for applications where packaging format does not affect assembly or handling requirements.

Q: What is the significance of the packaging difference between these parts?

A: Tape & Reel packaging (RN60C3920FRE6) is designed for automated pick-and-place assembly systems. Bulk packaging (RN60C3920FB14) is used for manual assembly or alternative handling methods. The electrical and mechanical performance of the resistor itself is identical regardless of packaging format.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and military series designation (MIL-R-10509/1, RN60). Compliance profiles are equivalent.

Q: What parameters determine substitution eligibility for the RN60C3920FRE6?

A: Substitution eligibility is determined by matching resistance value (392 Ohms), tolerance (±1%), power rating (0.25W), composition (Metal Film), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), package type (Axial), and physical dimensions (0.145" Dia × 0.344" L). All these parameters are identical between the main part and substitute.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. Both parts have identical axial package dimensions and electrical specifications. PCB footprints and circuit performance remain unchanged when substituting between these parts.