RN60C3322FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C3322FRE6 is a 33.2 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale and conforms to military specification MIL-R-10509/1. The part features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The RN60C3322FRE6 is currently in active production status with 848 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary packaging format (Tape & Reel) is unavailable or when bulk inventory is required.

Substiute Parts

RN60C3322FRE6

Vishay DaleIn Stock: 890RN60C3322FRE6 Datasheet

Current PartRFQ

RN60C3322FB14

Vishay DaleIn Stock: 2116RN60C3322FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RN60C3322FRE6 is determined by strict equivalence across the following electrical and mechanical parameters:

• Resistance value: 33.2 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W (1/4W) (exact match required)
• Composition: Metal Film (exact match required)
• Package type: Axial (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Military series compliance: MIL-R-10509/1, RN60 (exact match required)
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm) (exact match required)

The RN60C3322FB14 qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The only difference is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts share the same base product number (RN60) and manufacturing series designation.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C3322FRE6 and RN60C3322FB14 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts is determined by packaging and inventory requirements rather than functional performance.

The RN60C3322FRE6 in Tape & Reel packaging is suitable for automated assembly processes and high-volume production environments. The RN60C3322FB14 in Bulk packaging is appropriate for manual assembly, prototyping, or applications where component quantities do not justify tape-and-reel procurement.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. Military series designation (MIL-R-10509/1) and all performance characteristics remain constant across both packaging options.

Frequently Asked Questions (FAQ)

Q: Can RN60C3322FB14 be used as a direct replacement for RN60C3322FRE6?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Tape & Reel). Functional performance, electrical specifications, and physical dimensions are equivalent.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly. Bulk packaging supplies loose components in quantities suitable for manual handling and assembly. Both formats contain the same component with identical specifications.

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant) and REACH status (Affected). Military series compliance (MIL-R-10509/1) applies to both.

Q: What determines substitution eligibility for this resistor?

A: Substitution is based on exact equivalence of resistance value (33.2 kOhms), tolerance (±1%), power rating (0.25W), composition (Metal Film), package type (Axial), temperature coefficient (±50ppm/°C), operating temperature range (-65°C to 175°C), and military series designation (MIL-R-10509/1, RN60).

Q: Can I substitute with a different resistance value or tolerance?

A: No. The resistance value and tolerance are critical electrical parameters. Substitution is limited to parts with identical 33.2 kOhms ±1% specifications.

Q: Are physical dimensions identical between these parts?

A: Yes. Both parts measure 0.145" Dia x 0.344" L (3.68mm x 8.74mm) and are compatible with identical PCB layouts and mechanical assemblies.