RN60C3321FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C3321FRE6 is a 3.32 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1) and features flame retardant coating with moisture-resistant properties suitable for military applications. The part maintains active product status with 950 units currently in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical, enabling procurement flexibility across different supply channels and inventory conditions.

Substiute Parts

RN60C3321FRE6

Vishay DaleIn Stock: 1016RN60C3321FRE6 Datasheet

Current PartRFQ

RN60C3321FB14

Vishay DaleIn Stock: 1147RN60C3321FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C3321FRE6 is determined by strict equivalence across all electrical and mechanical parameters. The primary differentiator between the main part and identified substitutes is packaging format. The RN60C3321FRE6 is supplied in Tape & Reel (TR) configuration, while the substitute RN60C3321FB14 is supplied in Bulk packaging. Both parts maintain identical specifications across the following critical parameters:

• Resistance value: 3.32 kOhms
• Tolerance: ±1%
• Power rating: 0.25W
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -65°C to 175°C
• Physical dimensions: 0.145" Dia × 0.344" L
• Military series classification: MIL-R-10509/1, RN60
• Feature set: Flame retardant coating, moisture resistance, safety designation

The substitute part RN60C3321FB14 is functionally and electrically equivalent to the main part, with the only distinction being the supply packaging method.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C3321FRE6 and RN60C3321FB14 maintain active product status from Vishay Dale and are suitable for direct substitution in applications requiring military-grade 3.32 kOhms metal film resistors. Selection between these parts should be based on procurement requirements and assembly processes. The Tape & Reel format (RN60C3321FRE6) is optimized for automated pick-and-place assembly operations, while the Bulk format (RN60C3321FB14) accommodates manual assembly or alternative handling procedures. Both parts carry identical RoHS non-compliant and REACH Affected designations, requiring equivalent compliance consideration in end-use applications. Current inventory levels show 950 units for the TR variant and 1098 units for the Bulk variant, supporting availability across both supply channels.

Frequently Asked Questions (FAQ)

Q: Can RN60C3321FB14 be used as a direct replacement for RN60C3321FRE6?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. The only difference is packaging format: Tape & Reel versus Bulk. Selection depends on assembly method and procurement requirements, not functional performance.

Q: What determines substitution eligibility for these resistor parts?

A: Substitution is valid when the following parameters match exactly: resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, physical dimensions, and feature set. Packaging format alone does not prevent substitution.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical RoHS non-compliant and REACH Affected designations. Compliance considerations apply equally to both variants.

Q: Which packaging format should I select for my application?

A: Tape & Reel (RN60C3321FRE6) is standard for automated assembly lines. Bulk (RN60C3321FB14) is suitable for manual assembly or alternative handling processes. The choice depends on your manufacturing workflow, not on electrical performance.

Q: Do these parts meet military specifications?

A: Both parts are manufactured under the military RN60 series classification (MIL-R-10509/1) and include flame retardant coating and moisture-resistant properties required for military applications.