RN60C3012FRSL Equivalent & Substitute Parts

Part Overview

The RN60C3012FRSL is a 30.1 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is manufactured by Vishay Dale and conforms to military specification MIL-R-10509/1. The part features flame retardant coating, moisture resistance, and safety-grade construction suitable for military and high-reliability applications. With active product status and 1066 units in current inventory, this resistor remains available for new designs and production requirements. Substitute parts are identified based on identical electrical specifications and compatible mechanical packaging to ensure direct functional equivalence in circuit applications.

Substiute Parts

RN60C3012FRSL

Vishay DaleIn Stock: 1158RN60C3012FRSL Datasheet

Current PartRFQ

RN60C3012FB14

Vishay DaleIn Stock: 911RN60C3012FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RN60C3012FRSL are identified through strict equivalence of the following critical parameters:

• Resistance value: 30.1 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Package configuration: Axial through-hole (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)
• Military series compliance: MIL-R-10509/1, RN60 base product (exact match required)

The RN60C3012FB14 meets all substitution criteria as a direct equivalent. The only difference between the main part and substitute is packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Bulk packaging. Both parts share identical electrical and mechanical specifications, allowing interchangeable use in circuit designs where the packaging format does not impose supply chain or assembly constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the RN60C3012FRSL and RN60C3012FB14 maintain active product status with current manufacturing support from Vishay Dale. Selection between these parts should be based on supply chain and assembly requirements rather than electrical or mechanical performance, as both components are functionally identical.

The RN60C3012FRSL in Tape & Reel packaging is suitable for automated assembly processes and high-volume production environments where component feeding and placement automation are employed. The RN60C3012FB14 in Bulk packaging is appropriate for manual assembly, prototyping, repair operations, or environments where tape-and-reel handling infrastructure is not available.

Both parts carry identical compliance status: RoHS non-compliant and REACH Affected. Applications requiring RoHS or REACH compliance cannot use either part without design modification. Military specification MIL-R-10509/1 compliance is maintained across both variants, ensuring suitability for defense and aerospace applications where this standard is mandated.

Frequently Asked Questions (FAQ)

Q: Can RN60C3012FB14 be used as a direct replacement for RN60C3012FRSL in production?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. If your assembly process can accommodate Bulk packaging instead of Tape & Reel, the RN60C3012FB14 is a direct functional substitute.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, designed for automated pick-and-place assembly equipment. Bulk packaging supplies loose components in bags or trays, suitable for manual handling and assembly. Both formats contain identical components with identical specifications.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts share identical resistance value (30.1 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±50ppm/°C), and operating temperature range (-65°C to 175°C). Electrical performance is equivalent.

Q: Do both parts meet military specifications?

A: Yes. Both RN60C3012FRSL and RN60C3012FB14 conform to MIL-R-10509/1 and are part of the RN60 military-grade resistor series. Military specification compliance is identical.

Q: What is the physical compatibility of these parts?

A: Both parts use identical axial through-hole package configuration with dimensions of 0.145" diameter × 0.344" length (3.68mm × 8.74mm). They are physically interchangeable on PCBs designed for axial component mounting.

Q: Are there compliance or certification differences?

A: No. Both parts carry identical RoHS non-compliant and REACH Affected status. Compliance certifications are equivalent. Applications requiring RoHS or REACH compliance cannot use either part.

Q: Which part should I select for new designs?

A: Selection depends on your manufacturing process. For automated assembly with tape-and-reel equipment, use RN60C3012FRSL. For manual assembly or environments without automated feeding capability, use RN60C3012FB14. Electrical and mechanical performance are identical.