RN60C2003FBSL Equivalent & Substitute Parts

Part Overview

The RN60C2003FBSL is a 200 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. This component is part of the Vishay Dale RN60 military-grade series, featuring flame retardant coating and moisture resistance suitable for demanding applications. The part is currently active in production with 681 pieces available in bulk packaging. Substitute parts are identified to address packaging availability, inventory levels, or supply chain requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

RN60C2003FBSL

Vishay DaleIn Stock: 736RN60C2003FBSL Datasheet

Current PartRFQ

RN60C2003FRE6

Vishay DaleIn Stock: 2965RN60C2003FRE6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C2003FBSL is determined by strict equivalence across the following critical parameters:

• Resistance value: 200 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W/1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package type: Axial (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Series: RN60 military-grade classification (exact match required)
• Physical dimensions: 0.145" Dia × 0.344" L (exact match required)

The identified substitute part RN60C2003FRE6 meets all electrical and mechanical parameters. The only difference is packaging format: the main part is supplied in bulk packaging, while the substitute is supplied in cut tape (CT) packaging. Both parts share identical component specifications and are sourced from the same manufacturer (Vishay Dale).

Parameter Comparison

Engineering Selection Recommendations

Both RN60C2003FBSL and RN60C2003FRE6 are active production components from Vishay Dale with identical electrical performance and mechanical specifications. Selection between these parts should be based on packaging requirements and supply chain logistics:

• RN60C2003FBSL (bulk packaging) is suitable for high-volume manufacturing environments with automated handling systems.
• RN60C2003FRE6 (cut tape packaging) is suitable for lower-volume applications, component-level inventory management, or pick-and-place assembly systems.

Both parts maintain identical compliance status: RoHS non-compliant and REACH Affected. No functional or performance differences exist between these components. The choice is determined solely by packaging format and procurement workflow requirements.

Frequently Asked Questions (FAQ)

Q: Can RN60C2003FRE6 be used as a direct replacement for RN60C2003FBSL?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (bulk versus cut tape). Functional performance, electrical characteristics, and physical dimensions are identical.

Q: Are there any performance differences between bulk and cut tape packaging?

A: No. Packaging format does not affect component performance. The resistor itself is identical in both cases. Packaging differences relate only to supply chain handling and assembly process compatibility.

Q: Do both parts meet the same military specifications?

A: Yes. Both parts are classified as Military, MIL-R-10509/1, RN60 series components with identical feature sets including flame retardant coating, moisture resistance, and safety characteristics.

Q: What is the significance of the ±50ppm/°C temperature coefficient?

A: This specification defines the resistor's resistance change per degree Celsius within the operating temperature range of -65°C to 175°C. Both substitute parts maintain this identical specification.

Q: Are there any compliance or certification differences?

A: No. Both parts share identical RoHS and REACH status. Both are RoHS non-compliant and REACH Affected. No compliance advantages exist between the two part numbers.

Q: Which packaging format should be selected for new designs?

A: Selection depends on manufacturing process requirements. Cut tape (CT) packaging is standard for automated pick-and-place assembly. Bulk packaging is used for manual assembly or high-volume tape-and-reel conversion processes. Electrical performance is identical regardless of packaging choice.