RN60C2001FRE6 Equivalent & Substitute Parts

Part Overview

The RN60C2001FRE6 is a 2 kOhms ±1% metal film axial through-hole resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/1. The part is currently active in production with 2058 units in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained within the allowed parameter tolerances for this resistor category.

Substiute Parts

RN60C2001FRE6

Vishay DaleIn Stock: 2116RN60C2001FRE6 Datasheet

Current PartRFQ

RN60C2001FB14

Vishay DaleIn Stock: 1001RN60C2001FB14 Datasheet

DirectRFQ

RN60C2001BB14

Vishay DaleIn Stock: 1055RN60C2001BB14 Datasheet

UpgradeRFQ

RN60E2001BB14

Vishay DaleIn Stock: 1183RN60E2001BB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C2001FRE6 is determined by the following criteria:

Primary Substitution Criteria:

• Resistance value: 2 kOhms (exact match required)
• Power rating: 0.25W (1/4W) (exact match required)
• Package type: Axial (exact match required)
• Composition: Metal Film (exact match required)
• Operating temperature range: -65°C to 175°C (exact match required)
• Physical dimensions: 0.145" Dia x 0.344" L (exact match required)
• Series: RN60 military-grade (exact match required)

Secondary Substitution Criteria:

• Tolerance: ±1% or tighter (±0.1% acceptable as upgrade)
• Temperature coefficient: ±50ppm/°C or better (±25ppm/°C acceptable as upgrade)
• Packaging format: Cut Tape (CT) or Bulk (interchangeable for component selection)

All substitute parts maintain identical electrical performance within the RN60 series specifications and are compatible with applications designed for the RN60C2001FRE6.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Tolerance): RN60C2001FB14 is a direct equivalent to RN60C2001FRE6. Both parts maintain ±1% tolerance and ±50ppm/°C temperature coefficient. The only difference is packaging format: RN60C2001FRE6 is supplied in Cut Tape (CT), while RN60C2001FB14 is supplied in Bulk. Both are active products with full military compliance and RoHS non-compliant status consistent with MIL-R-10509/1 specifications.

Upgraded Tolerance Options: RN60C2001BB14 and RN60E2001BB14 provide tighter tolerance at ±0.1%, suitable for applications requiring higher precision. RN60C2001BB14 maintains the ±50ppm/°C temperature coefficient of the original part. RN60E2001BB14 offers improved temperature stability at ±25ppm/°C, making it suitable for temperature-sensitive applications. Both upgrade parts are supplied in Bulk packaging and are active products with identical military compliance.

All substitute parts are REACH Affected and classified under ECCN EAR99 with HTSUS code 8533.21.0090, consistent with the main part specifications.

Frequently Asked Questions (FAQ)

Q: Can RN60C2001FB14 replace RN60C2001FRE6 in production? A: Yes. RN60C2001FB14 is electrically and mechanically identical to RN60C2001FRE6. The only difference is packaging format (Bulk vs. Cut Tape). Both maintain ±1% tolerance, ±50ppm/°C temperature coefficient, and identical physical dimensions. Packaging format does not affect component performance in the circuit.

Q: What is the difference between the ±1% and ±0.1% tolerance options? A: Tolerance defines the maximum deviation of the actual resistance value from the nominal 2 kOhms specification. RN60C2001FRE6 and RN60C2001FB14 allow ±1% deviation (1980-2020 Ohms). RN60C2001BB14 and RN60E2001BB14 allow ±0.1% deviation (1998-2002 Ohms). Tighter tolerance is required for precision analog circuits, measurement equipment, and applications with strict impedance matching requirements.

Q: Should I use RN60E2001BB14 instead of RN60C2001BB14? A: RN60E2001BB14 offers superior temperature stability (±25ppm/°C vs. ±50ppm/°C). Select RN60E2001BB14 for applications operating across wide temperature ranges or where temperature-induced resistance drift must be minimized. For standard applications within the -65°C to 175°C range, RN60C2001BB14 is sufficient.

Q: Are all substitute parts military-grade? A: Yes. All parts listed (RN60C2001FRE6, RN60C2001FB14, RN60C2001BB14, RN60E2001BB14) are part of the military-grade RN60 series compliant with MIL-R-10509/1. All feature flame retardant coating, moisture resistance, and safety certification.

Q: What is the impact of packaging format on component selection? A: Packaging format (Cut Tape vs. Bulk) affects handling and assembly logistics but does not impact electrical or mechanical performance. Cut Tape packaging is suitable for automated pick-and-place assembly. Bulk packaging is used for manual assembly or high-volume reel-based processes. Select based on assembly method requirements, not circuit performance.

Q: Are these parts RoHS compliant? A: No. All listed parts are RoHS non-compliant, consistent with military-grade specifications under MIL-R-10509/1. This is a standard characteristic of military resistor series and does not affect performance in military or aerospace applications.