Equivalent & Substitute Parts for RN60C2000FRSL

Part Overview

The RN60C2000FRSL is a 200 Ohm, 1/4W metal film axial resistor manufactured by Vishay Dale, designed for military applications per MIL-R-10509/1 specification. This component features flame retardant coating, moisture resistance, and safety-rated construction. The part is currently active in production with 1062 units in stock. Substitute parts are identified to address packaging format availability, tolerance requirements, and inventory considerations while maintaining electrical and mechanical compatibility.

Substiute Parts

RN60C2000FRSL

Vishay DaleIn Stock: 1108RN60C2000FRSL Datasheet

Current PartRFQ

RN60C2000FB14

Vishay DaleIn Stock: 1726RN60C2000FB14 Datasheet

DirectRFQ

RN60E2000BB14

Vishay DaleIn Stock: 1658RN60E2000BB14 Datasheet

UpgradeRFQ

RN60C2000FRE6

Vishay DaleIn Stock: 6550RN60C2000FRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence in the following parameters: resistance value (200 Ohms), power rating (0.25W), composition (metal film), package type (axial), operating temperature range (-65°C to 175°C), physical dimensions (0.145" Dia × 0.344" L), and military series classification (MIL-R-10509/1, RN60 base product).

The identified substitutes are grouped as follows:

Direct Equivalent (Packaging Variant): RN60C2000FB14 matches all electrical and mechanical specifications with identical tolerance (±1%) and temperature coefficient (±50ppm/°C). The only difference is packaging format (Bulk versus Tape & Reel).

Upgrade Equivalent (Enhanced Tolerance): RN60E2000BB14 maintains all core electrical and mechanical parameters but provides tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). This represents a performance upgrade suitable for applications requiring higher precision.

Parametric Equivalent (Packaging Variant): RN60C2000FRE6 is electrically and mechanically identical to the main part with matching tolerance and temperature coefficient specifications. The difference is packaging format (Cut Tape versus Tape & Reel).

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and are manufactured by Vishay Dale under the same military series classification (MIL-R-10509/1, RN60). All parts share identical RoHS non-compliance status, REACH affected classification, ECCN EAR99, and HTSUS code 8533.21.0090.

Selection between substitutes should be based on packaging requirements and tolerance specifications:

RN60C2000FB14 is suitable for applications where Bulk packaging is acceptable and ±1% tolerance meets circuit requirements.

RN60E2000BB14 is appropriate for circuits requiring enhanced precision with ±0.1% tolerance and lower temperature coefficient (±25ppm/°C).

RN60C2000FRE6 is applicable when Cut Tape packaging format is preferred, with highest inventory availability (6452 units) and identical electrical specifications to the main part.

Frequently Asked Questions (FAQ)

Q: Can RN60C2000FB14 be used as a direct replacement for RN60C2000FRSL?

A: Yes. Both parts are electrically and mechanically identical with 200 Ohms resistance, ±1% tolerance, 0.25W power rating, and identical physical dimensions. The only difference is packaging format (Bulk versus Tape & Reel). Substitution is valid if the receiving application accepts Bulk packaging.

Q: What is the advantage of RN60E2000BB14 over the main part?

A: RN60E2000BB14 provides tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). These specifications are beneficial for precision analog circuits, measurement equipment, and applications with stringent accuracy requirements. All other electrical and mechanical parameters remain identical.

Q: Is RN60C2000FRE6 compatible with the original design?

A: Yes. RN60C2000FRE6 matches all electrical specifications and physical dimensions of RN60C2000FRSL. The difference is packaging format (Cut Tape versus Tape & Reel). This part has the highest inventory availability at 6452 units.

Q: Are all substitute parts military-grade components?

A: Yes. All substitute parts are classified under the Military series with MIL-R-10509/1 specification compliance and RN60 base product designation. All feature flame retardant coating, moisture resistance, and safety-rated construction.

Q: What packaging formats are available for this 200 Ohm resistor?

A: Three packaging formats are available: Tape & Reel (RN60C2000FRSL), Bulk (RN60C2000FB14), and Cut Tape (RN60C2000FRE6). Selection depends on assembly process requirements and inventory management preferences.

Q: Can tolerance specifications be mixed within a single circuit design?

A: Component selection should align with circuit tolerance requirements. If the design specifies ±1% tolerance, all resistors should maintain this specification. If higher precision is required, RN60E2000BB14 with ±0.1% tolerance can be used, but this represents a design change that may require circuit re-evaluation.